1 / 3
Nuki EVVA/CES Adapter (based on official green (1) adapter)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter)
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 276
- Wydruki
- 1
- Wyświetlenia
- 1551
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code (splintDiameter). Printing with 10%-30% infill works fine.
You can customize all values of this thing to adapt to your door
- How height the round splint'ed thing is:
doorHeight = 8; - How height the hex-part is:
nukiHeight = 9; - How large the hex-part is:
nukiDiameter = 17; - How thick the hex-bottom is:
nukiBottomWidth = 1.5; - How wide the pin is which holds it at the door:
doorPinDiameter = 10; - How large the splint is:
splintDiameter = 4; - Will make the holes wider:
printerSpecificAdd = .3;