1 / 1
Z independent dust shoe for the PrintNC CNC — zdjęcie 1

Z independent dust shoe for the PrintNC CNC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dust shoe stays at the same height as the spindle plunges.

Ocena
0 / 5
Polubienia
13
Pobrania
48
Wydruki
0
Wyświetlenia
830
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I wanted a dust shoe that could have its height set independently of the Z movement so I came up with this.

Video of it in action: https://www.youtube.com/watch?v=Cq3LlhZMwkM

In the STEP file are two options for the shoe. One is 3D Printed, the other can be machined on the PrintNC. The printed shoe needs a machine with a 300mm bed size so I recommend going for the machined version. You can use 10mm perspex.

To complete you will need the following stuff:

For the 3D Printed version:

2 x 8mm smooth rod approximately 150mm in length
16 x M4 x 20mm bolts
10 x M4 nyloc nuts
1 x Dust booth brush
4 x LM8UU bearings
12 x 8mm x 1mm magnets

For the machined version:

2 x 8mm smooth rod approximately 150mm in length
16 x M4 x 20mm bolts
10 x M4 nyloc nuts
1 x Dust booth brush
4 x LM8UU bearings
12 x 8mm x 2mm magnets