Z independent dust shoe for the PrintNC CNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust shoe stays at the same height as the spindle plunges.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 48
- Makes
- 0
- Views
- 830
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I wanted a dust shoe that could have its height set independently of the Z movement so I came up with this.
Video of it in action: https://www.youtube.com/watch?v=Cq3LlhZMwkM
In the STEP file are two options for the shoe. One is 3D Printed, the other can be machined on the PrintNC. The printed shoe needs a machine with a 300mm bed size so I recommend going for the machined version. You can use 10mm perspex.
To complete you will need the following stuff:
For the 3D Printed version:
2 x 8mm smooth rod approximately 150mm in length
16 x M4 x 20mm bolts
10 x M4 nyloc nuts
1 x Dust booth brush
4 x LM8UU bearings
12 x 8mm x 1mm magnets
For the machined version:
2 x 8mm smooth rod approximately 150mm in length
16 x M4 x 20mm bolts
10 x M4 nyloc nuts
1 x Dust booth brush
4 x LM8UU bearings
12 x 8mm x 2mm magnets
