1 / 4
SCX6 - SkyRC GSM020 GPS - Water Resistant Case — zdjęcie 1
1 / 4

SCX6 - SkyRC GSM020 GPS - Water Resistant Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SkyRC GSM020 GPS Water Resistant Case for SCX6, Boats & Other RCs

Ocena
5 / 5
Polubienia
22
Pobrania
233
Wydruki
2
Wyświetlenia
1424
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

For those you want to track distance, but not be worried about getting your SkyRC GPS wet this is the case for you. I have submerged the case for about 5-min and only experienced very minor water seepage. I wouldn't call this water proof, but it'll take a good splash or a few minutes under water without issue.

You'll need a small roll of both 2mm and 3mm solid rubber cord to act as gaskets; you could also print/use TPU, though I've not tried that. The 3mm rubber cord is used to hold the GPS tight in the case not allow it to bounce around and the 2mm cord is used as the main gasket.

Otherwise you'll also need 2 x 3mm 14mm or longer cap bolts to secure the top. You'll want to print the lid, base and two guides to complete this thing.

Tagi