Liczymy pasujące modele…
The lid is a slip fit that should stay in place pretty well. If it is too tight or too loose from your printer you can scale the lid up or down a few percent in X and Y then try again.
You'll need 2x 10x3mm magnets. Prints without supports.
For those you want to track distance, but not be worried about getting your SkyRC GPS wet this is the case for you. I have submerged the case for about 5-min and only experienced very minor water seepage. I wouldn't call this water proof,…
This is a protective case for the SKYRC B6neo and B6neo+ I am used to just throw my lipo charger inside my backpack and I quickly ended up breaking the screen. With this case that's no longer a problem. No supports needed. No extra…
iFlight BEC. Uses balance lead plug from 4-6s.
This is a derivate from my earlier posted iMax holder. I found out that this was a fake charger, so I felt needed to buy another one: the original charger from SkyRC! which is much better. Three parts: Base, shakle and the nest. It is…
Stand pour SkyRC D100 / D200 NEO. Le chargeur chauffe beaucoup, je conseille d'imprimer en ABS/TPU. Pièces imprimées sans supports.
I am not a fan of using double sided tape to glue the receiver to my vehicle or using velcro, so designed the box to be used with straps. Also the box offers a little protection. No supports required.
This mount for the Armma Infraction puts the SkyRC GSM020 GPS on the outside of your truck where you can see it. It will sit horizontal with no angle and is held down by 3 zip ties per side and one on cross brace so it won't slide down.…
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
6th September 2024: Version 2 uploaded. I've tried to make the lugs/holes a little more robust. Version 1 is still available. ---------------------------------------------------------------- Designed to enable easy and quick mounting to…
This is a remix to allow mounting the GPS with just Velcro or another similar material instead of clips. Cutouts are on both sides to allow easy removal, and it's also possible to charge the GPS with a low profile USB-C cable. Print…
Just a very simple hardcase for protecting a SkyRC NeoB6-charger. Has a slight additional space (~0.5 mm) on the screen-axis to fit either manual or screen protector. Update 2024-06-03: Uploaded a modified version for the B6AC neo. Just…
Adapter to charge LiPo batteries with a Skyrc MC3000 (or any other) charger Made for LiPo with JST 2.0 adapters I used the JST 2.0 from an old and broken WeMos D1 Mini LiPo Batterie Shield You need to print the round part twice. It fits…
This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…
I designed this mount for the SkyRC GSM020 Performance Analyzer to fit the BL-2s Stampede right on the top of the steering servo. It may also work with the Traxxas Hoss 4x4 since they share the same chassis, TRX9022. This mod is non…
There is additional compartment for small wires or a small USB Type-C cable. Additionally you will need: 8pcs 5mm x 2mm round magnets Soft pad from the original box to fix charger (as on picture). You can use anything else like soft…
As the title suggests, this is a mount for the SkyRC GSM020 GPS for the Traxxas Rustler 4x4. This was designed with the legacy Rustler 4x4 chassis, but I believe it will fit any other Traxxas low-cg chassis vehicle. If you can print and…
Skadis Mount for VIFLY WhoopStor 3 Keep your workspace tidy and your gear right where you need it! This custom mount allows you to securely attach the VIFLY WhoopStor 3 or SkyRC B6 Neo+ charger to an IKEA Skadis pegboard. No more loose…
Malo miesta na stole? Tento stojan ušetrí miesto na stole a to jednoducho. Ak máš nápad ako by som ho mohol vylepšiť, tak mi napíš. Stojan 3 in 1: stojan na RC model držiak SKYRC 200W držiak SKYRC Tire Warmer Odporúčam pre rýchle…
My Skyrc 2500 charger stand/leg broke. This design works as a replacement. I printed at .2mm layer height using PLA+
Designed this light weight holder for the SkyRC Leopard V2 ESC, primarily designed for the Marui Big Bear that has a suitable space for it in the back of the chassis. Drill holes to the mounting position of the chassis and use M3 screws…
This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…
Malo miesta na stole? Tento stojan V.2 ušetrí miesto na stole a to jednoducho. Ak máš nápad ako by som ho mohol vylepšiť, tak mi napíš. Oproti prvej verzií je produkt menší a ma väčšiu plochu na model auta. Stojan 3 in 1: stojan na RC…
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
Malo miesta na stole? Tento stojan ušetrí miesto na stole a to jednoducho. Ak máš nápad ako by som ho mohol vylepšiť, tak mi napíš. Stojan 3 in 1: stojan na RC model držiak SKYRC 200W držiak SKYRC Tire Warmer Odporúčam pre rýchle…
Simple adjustable stand for the SkyRC Neo B6. While it's not fully finalized yet, it works, and I would be glad if anyone had ideas on how to improve the model to make it more reliable. There are currently two versions. Both have…
This mount for the Traxxas Stampede puts the SkyRC GSM020 GPS under the rear 'bed' to keep it out of the way. Quick and easy print (about an hour). This fits the stock rear body mounts. You'll need: 2 x M3x20mm cap head bolts (18mm also…
Gets rid of the little ears for mounting points and screws directly on top of the Arrma Infraction/Felony body mounts. Comes up to be roughly even with the top surface of a 32mm mount. Category: R/C Vehicles
The SkyRC MC3000 battery charger/tester is a great device but given the large range of cells that it supports, the AAA cells are a pain to align. This adapter eliminates that issue. It lifts the cell into the proper position and prevents…
this is a work in progress mount to locate the skyRC gsm020 gps to an arrma senton 223s V4 model, the rear systems ion tower mount has a hole that is likely used for sway bars on other models that is empty, and this bracket sits nicely…
Box for SkyRC Corner Weight System. Print 2pcs. You need at least 8pcs (max 18pcs) Ø8x2mm neodym magnets.
This is a holder for the SkyRC GC-401 (or GC-301) Gyro which I mounted on the Team Corally Alu Front chassis brace. Part number: C-00180-387-2 I recommend to print this in TPU as the gyro fits pretty tight and you need to bend the holder…
This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…
Broke one of my legs, so i made one to replace it. advise to use petg, abs or tough pla (for flexibility) i printed mine in petg. best layer ht of 0.1
dp106 did a great job: https://www.thingiverse.com/thing:3390822 version: SkyRC_GPS_MOD_20190217 -added more space for mounting a strap, it was a littlebit to narrow version: SkyRC_GPS_MOD_20190202 some things I've added: -the base is…
Printed in two parts for ease of printing and then ca glued together to form the cradle that sits on top of the scale. Category: R/C Vehicles
Soporte para utilizar el medidor de velocidad de SKYRC GSM-015. Se necesita utilizar 2 tuercas de insercción M3x3.5(L)x4.6(OD)x6(HD)…
