Nail e-file bit tower for UV sterilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick model to hold nail e-file bits when placed in a UV sterilizer with a wide grate shelf
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
Needed a holder for nail e-file bits to go into a UV sterilizer - it couldn't be too big, and a tray would have blocked the light from the bottom part of the bits. I saw a few Dremel bit holders around, but all were too big/tall for this usecase - only 4-6 bits at a time need to go into the cabinet.
The holes are 2.7mm dia, so work well with 2.35mm dia e-file bits. Might work for other shank diameters, just scale the model up a bit. The base could have been slightly wider in my case to allow it to sit more comfortably across the rack in the cabinet.
Key here was making sure enough light could still hit the heads of the bits - hence the holes in the base (to save filament too.)
Rafts: No
Supports: No
Resolution: 0.15
Infill: 13% Cubic
Filament brand: eSUN
Filament color: Grey
Filament material: PETG
Notes:
Printed on Ender 3 S1 Pro:
230 extruder + 90 bed
50mm/s
2mm retraction @ 25mm/s
120mm travel speed
Very little stringing or anything
I printed in PETG as PLA probably won't like being jammed in one of these cabinets and bombarded with UV-light for extended periods of time - but maybe PETG won't either. Guess we'll see!