Animatronic Third Eye
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://youtu.be/NCNwCtgqzKk I created this animatronic eye for a friend doing a custom latex mask for cosplay. It…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
I created this animatronic eye for a friend doing a custom latex mask for cosplay. It uses standard 9g servo (tower pro, etc) to create a realistic moving eye ball effect.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Notes:
I angled the eye parts back about 30 degrees so the support would only go behind the front of the eye so it looks cleaner.
I used Simplify 3D with default settings for the Prusa Mk2.
Printed in Inland Egyptian Blue PLA
Post-Printing
I used an Arduino pro mini and wrote a simple program that sweeps the servo 30 degrees at random angles and delays. Then wired a small contact switch so the wearer can activate it, There's an LED behind the iris to make it glow, We filled the iris with an epoxy and painted it to match the contacts.
Category: Props