K40 Mirror Shims
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've finally got round to aligning the mirrors in my K40 laser cutter. Using the mirror alignment guide on…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I've finally got round to aligning the mirrors in my K40 laser cutter. Using the mirror alignment guide on k40laser.se, I needed to raise mirror 2 a little to get the alignment perfect. I tried using washers, but that was just too awkward for my fat fingers, so I designed and printed these shims instead.
There's a range of shims, from 2.0mm to 4.0mm in 0.5mm increments, which I found was enough range for me.
Print Settings
Printer:
Elegoo Mars
Rafts:
No
Supports:
Yes
Resolution:
0.05mm
Infill:
100%
Filament:
N/A Resin
N/A
Notes:
I used the standard settings in CHITUBOX. I also used a resin printer, but there's no reason why they shouldn't work on a standard FDM printer
In Fusion 360. If you want the Fusion files to modify them and make other heights, let me know.
Category: Parts