K40 Mirror Shims
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've finally got round to aligning the mirrors in my K40 laser cutter. Using the mirror alignment guide on…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 75
- Makes
- 0
- Views
- 425
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I've finally got round to aligning the mirrors in my K40 laser cutter. Using the mirror alignment guide on k40laser.se, I needed to raise mirror 2 a little to get the alignment perfect. I tried using washers, but that was just too awkward for my fat fingers, so I designed and printed these shims instead.
There's a range of shims, from 2.0mm to 4.0mm in 0.5mm increments, which I found was enough range for me.
Print Settings
Printer:
Elegoo Mars
Rafts:
No
Supports:
Yes
Resolution:
0.05mm
Infill:
100%
Filament:
N/A Resin
N/A
Notes:
I used the standard settings in CHITUBOX. I also used a resin printer, but there's no reason why they shouldn't work on a standard FDM printer
In Fusion 360. If you want the Fusion files to modify them and make other heights, let me know.
Category: Parts