1 / 1
Arctic F9 TPU Anti Vibration Pad (Front and Rear) — zdjęcie 1

Arctic F9 TPU Anti Vibration Pad (Front and Rear)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU insert for Arctic F9 fans to reduce vibrations, Noctua style.

Ocena
0 / 5
Polubienia
6
Pobrania
13
Wydruki
0
Wyświetlenia
498
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

Small vibration damping pads to be printed in TPU that can be inserted in each corner of an Arctic F9 PC fan. Try some different amounts of infill to see what works best with your flavor of TPU. They clamp in place pretty well, but you can also use a bit of glue or double sided tape to secure them better. 

I've printed these in NinjaTek NinjaFlex TPU with a .4mm nozzle. Sliced with 2 walls, 4 top and bottom layers, 50% infill with the cross-3d pattern in Cura.

I don't know if these fit any other Arctic fans, they don't on any of the other models I own (P12 and F14).

Tagi