Suspend game: frame rod connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The connector is 50 mm long. The rods measure 4.16 & 4.17 mm in diameter. I used a diameter of 4.16 mm in the model &…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The connector is 50 mm long. The rods measure 4.16 & 4.17 mm in diameter.
I used a diameter of 4.16 mm in the model & a multiplier of 1.05 that worked the first time.
I printed it with the axis parallel to the print bed. Printing it standing up would save support material, but would yield a weak result.
Because supports are required, minor drilling with a #19 drill bit is required. The resulting hole gives a nice snug fit with the frame rods. I suspect the holes will wear with use & eventually the piece will require replacement.
Category: Replacement Parts