Suspend game: frame rod connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The connector is 50 mm long. The rods measure 4.16 & 4.17 mm in diameter. I used a diameter of 4.16 mm in the model &…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 191
- Makes
- 0
- Views
- 1,087
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The connector is 50 mm long. The rods measure 4.16 & 4.17 mm in diameter.
I used a diameter of 4.16 mm in the model & a multiplier of 1.05 that worked the first time.
I printed it with the axis parallel to the print bed. Printing it standing up would save support material, but would yield a weak result.
Because supports are required, minor drilling with a #19 drill bit is required. The resulting hole gives a nice snug fit with the frame rods. I suspect the holes will wear with use & eventually the piece will require replacement.
Category: Replacement Parts