PDW Bindle Seatpost Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pulled dimensions off of the PDW bindle seatpost mount hardware. Interestingly enough, the pieces are in fact not the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Pulled dimensions off of the PDW bindle seatpost mount hardware. Interestingly enough, the pieces are in fact not the same width, by about 1 mm. I preserved this irregularity.
I included scans of the actual pieces to try & match other dimensions.
I'm not talking about the faces adjacent to the seatpost interface. That's supposed to be that way.
Requires 2 M6 x 1 bolts, about 30-45 mm in length. Supposed to support seatposts from 22.0 - 31.6 mm in diameter.
I think the binding post bolt is an M5 x 0.8, & the post is 35 mm long.
I don't recommend this for 3D printing, but for machining.
Category: Replacement Parts