PDW Bindle Seatpost Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pulled dimensions off of the PDW bindle seatpost mount hardware. Interestingly enough, the pieces are in fact not the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Pulled dimensions off of the PDW bindle seatpost mount hardware. Interestingly enough, the pieces are in fact not the same width, by about 1 mm. I preserved this irregularity.
I included scans of the actual pieces to try & match other dimensions.
I'm not talking about the faces adjacent to the seatpost interface. That's supposed to be that way.
Requires 2 M6 x 1 bolts, about 30-45 mm in length. Supposed to support seatposts from 22.0 - 31.6 mm in diameter.
I think the binding post bolt is an M5 x 0.8, & the post is 35 mm long.
I don't recommend this for 3D printing, but for machining.
Category: Replacement Parts