Disc Rotor Truing Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool for truing slightly bent disc rotors. Especially if you print at 100% infill, I think this should be strong…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 351
- Wydruki
- 0
- Wyświetlenia
- 1148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Tool for truing slightly bent disc rotors.
Especially if you print at 100% infill, I think this should be strong enough.
How I Designed This
Based on the Park Tool DT-2.
I was stupid & didn't measure the opening. I scaled everything to the hole, which I guessed as 6.30 mm.
Update 11 Apr 17: I measured it & updated the STL & SLDPRT. It's a 9.62 mm hole.
Tool is 6.30 mm thick though (1/4").
The slots for the actual rotors are 2.25 mm wide.
Actually measure the slot width.
Currently, it's 2.25 mm. I measured my 160 mm Tektro rotors, & they're 1.93 mm thick. So it should work.
Category: Tools