Disc Rotor Truing Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for truing slightly bent disc rotors. Especially if you print at 100% infill, I think this should be strong…
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 351
- Makes
- 0
- Views
- 1,148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Tool for truing slightly bent disc rotors.
Especially if you print at 100% infill, I think this should be strong enough.
How I Designed This
Based on the Park Tool DT-2.
I was stupid & didn't measure the opening. I scaled everything to the hole, which I guessed as 6.30 mm.
Update 11 Apr 17: I measured it & updated the STL & SLDPRT. It's a 9.62 mm hole.
Tool is 6.30 mm thick though (1/4").
The slots for the actual rotors are 2.25 mm wide.
Actually measure the slot width.
Currently, it's 2.25 mm. I measured my 160 mm Tektro rotors, & they're 1.93 mm thick. So it should work.
Category: Tools