Counting matching models…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
You need: 4 x screw or velcro tape. Good luck ;-)
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.
This 3D model posted on printables.com , is a copy of the Mitsugi Ohno true Klein bottle. Here is the story about the “true Klein bottle”. In 1892, mathematician Felix Klein first described the Klein bottle as an object that has a single…
A simple barrel-shaped easy to print bead featuring the coat of arms of Ukraine to support the right cause. 17 mm in diameter and 18 mm in height. 5 mm hole.
This is a 1/3 Scale 3T22A (or 2T22A) with WORKING DAMPERS!!! This siren was a collaboration between Nascarsimracing1 and I This siren weighs approximately 9 pounds! Thank you Jared for modeling this, my old modified Edaan B-core may be…
My front disk brake had an incident and was no longer true (straight). I tried to bend it back in right position by using this device. You will need 2 M6 screws and nuts.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A watering can attachment for a True Fruits bottle. The top can be filled up without having to unscrew it. I had…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A cute piggy bank attachment for a True Fruits bottle. Stop having coins lying around. Save your spare cash in a…
You can put a spring (extruder P1S Spring) between the PEGT Washer and the patch part. M3 screw and bolt to complete the build. Original HDZero rail adapter : https://www.thingiverse.com/thing:5621199
Designed for multi material (MMU) printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank. The holder snaps onto the headrest rod. I…
Made a Base for my dashcam, because i dont like to install it permanently. Use some double sided tape and stick the camera on to the base! I also added some kind of rubber feet (i reccomend Uhu Patafix [called here in germany]) at the…
Minecraft Heart for true fans I have attached the STL file, as well as the 3mf file with all settings, including the colour definition. I printed it with a 0.4 mm nozzle and a layer height of 0.2 mm. HAPPY.PRINT:-)
The True Excalibur is Sir Radzig's Sword If you do not believe me, try for yourself! I designed this with a little help from my two boys. (You can see them on my profile picture) This is how it works. (After printing and assembly – see…
📚Library signs: Create your own themed sections! Hello everyone! Want to give your library the order and style of old-fashioned bookstores? I’ve designed this system of hanging library signs. 🛠 What you’ll need Printed model: 3-part…
Screen holder for a Vantrue Pilot 2 to go into a first gen RAV4. I've included the version that I used that also has a holder for an Oracle Lighting Trigger 4 Plus remote, and another that just mounts the P2 screen. The mount just gets…
A funnel for the 750 ml True Fruits bottle. Can be easily printed without supports. I printed it using PLA with 2 wall and 10% Infill.
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
To use: remove the nozzle, then mount this using a m6x8 bolt. i used nuts instead of heatsets to attach the adxl to the mount since nuts are plenty rigid. if that bothers you i added step files so you could mod it yourself.
Ein Neuer Deckel für die True Fruit 750ml Flaschen mit Trinkhals. eine Handvoll vorteile bietet der neue Deckel. z.B er Rostet nicht, das Trinken ist einfacher und einfach zu drucken :) Das ist das Grundmodell. ein Stopfen und Neue…
I made this in Tinkercad to fit my multimeter. Very tight fit with cable holder. Use heatgun or similar if too tight. can be bought here: https://amzn.to/3tRcMsx
@6d6178 @snail Challenge accepted. This attached STL contain all of the required 80 bytes STL file header and 4 bytes reserved for unsigned integer. This is CAN NOT be printed nor sliced, But can be examined to ensure it contains the…
A simple piggy bank lid for the big (750ml) true fruits jars. Printed on a Mini+ with PLA.
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
(Copied from the original listing on Maker World) DF54 true zero indicator that uses the original screw. Tight fit so it might work without the screw as well. Do not mind the reflections in the picture. Printed with High Quality BBL A1…
This is a true 12:1 ratio extruder motor indicator! The main gear is attached to your extruder motor with a simple 8x3mm magnet, and as your extruder turns, the arms on this will spin like a real clock. Gears were created using Gear…
Hier eine Möglichkeit die TrueFruits Gläser gut trocknen zu können. Der Trockner passt bei beiden Größen der Gläser. Ich nutze PLA mit 0.25mm Schichthöhe.
You need: 4 x screw or velcro tape. Good luck ;-)
New better version V2 here - TrueLife NannyCam camera holder - Version v2 od autora anthan.cz | Stáhněte si zdarma STL model | Printables.com Holder for TrueLife NannyCam H32 babyphone fits to edge of bed suitable for width 20-28mm only…
This is a clip-on mount for a Vantrue Element E1 dashcam. It should also work with the E1 Pro and E1 Lite. It is designed to clip onto the forward edge of my 2022 Ford Transit 350 XLT van dashboard. I did not want to have the dashcam…
The only way to have peace is to deliver our true hearts to each other — fears, love, needs, concerns, worries, pain, joy, emptiness, frustrations, shame, understanding — without acting like a superior. Because we're all just a moment of…
True Fruits Trichter für die 750ml Flasche gedruckt mit 15 Prozent infill und der 0,4 hf nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
True Fruits Trichter für die 99ml 250ml Flasche mit 15 Prozent infill und mit der 0.4 hf Nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
I recommend printing with PLA due to the required high cooling in the lower parts of the model, add an offset of 0.1mm so that the headphones fit easily into the stations
I made a cover for my Walksnail Goggles X True RC patches by LetsflyRC.
Printed in ASA so it doesn't warp, upright print no supports needed
If the light from the screen annoys you, here's a cover
Antenna Case for TrueRC Singularity 5.8GHz - SMA 120mm Needed Parts: 8x magnets with a hight of 4.5mm and a diameter of 3mm.
This gadget help to hold connector during the screw tightening process. Not need to hold in your hand, not will rolling on your working desk under screwing process. "Right hand" version, the label can help to find the correct place for…
These brackets feature some enhancements over other designs: X-Airs are held in place by clips. No adhesive or tape. Feet added to the bottom of the brackets supports the goggles and prevents the focus adjust wheels from touching. Curved…
Sprout filter bottle cap for a 750ml true fruits smoothie bottle. To fill up vitamins also in winter you can recyle a True Fruit bottle and convert it into a micro green sprouting farm.
This part replaces the blanking plate in the modular 19" Rittal DK 7240.210 PDU with a module that can hold a Neutrik NAC3PX-TOP inlet-outlet. Installing it involves removing the fixed cable. Obviously, you can recycle the cable with a…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
Use case: One-hand tape dispenser for tape up to 18mm wide, typically “Tesafilm”, which is widely used in Germany for parcel wrapping and other household needs. What you need in addition to the 3D printed files: Almost nothing! I used a…
Zjistil jsem, že kartáčky Clean30 od TrueLife nejsou úplně kulaté, tak jsem vytvořil tento jednoduchý model Duo, bez zbytečných otvorů pro náhradní hlavice, na které se stejně jen práší.
This Caddy holds my diabetes testing equipment: Walgreens True Metrix Air meter True Metrix 50 Test Strips vials Sterile Alcohol Swabs (52x52mm, 40 count) Walgreens Lancer (5 extra lancet tips stored in 1 of the Test Strip vials) Download…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
i created a simple wall mount for specific “true fruits" smoothie bottles. These are very common here in Germany and are also kinda good looking with all their different designs. The print is mounted to a wall via small wood screws. The…
A very simple, cost effective, robust, slot car tyre/tire scrubber for truing and balancing slot car tyres/tires for the cost of less than a coffee. You will need; 1. 2x Carrera 20366 replaceable braids 2. 1x PWM Controllers (Dimmer…
Skoda Octavia Combi II - Vantrue E2 rear dashcam mount The camera is only clicked in and not glued. It holds very good. Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Rafts:** Yes Supports: No **Resolution:** 0.2 Infill: 20%…
flat top good to start your own variation, or lay a vinyl on it, or just use as-is
I have no idea why the original original is so jagged but ive corrected it
I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…
True Love Text Illusion: A design that reveals the text ‘TRUE’ from one perspective and the text ‘LOVE from another with stylized fonts. The perfect print for the coming Valentine's Day. Would you like a 3D text illusion model with your…
Makes swapping filament in a dry environment super easy. No more packing / unpacking spools when switching filament. A drybox is needed for filament because most 3D printing filaments are hygroscopic, meaning they absorb moisture from the…
I made a replacement handle for a True commercial refrigerator model GDM-41. The model should be stronger. The model is solid instead of having empty space in the back for injection molding. I recommended increasing the wall thickness to…
This is 2 inch drone frame in 3 sizes 1.5mm, 2mm, 2.5mm. if you crash this frame will die, but this is 3d printed and you can print new. Enjoy :) fly on this frame:
Simple word combo, shows TRUE and LOVE depending on the viewing angle
A case for TrueRC X-Air antennas. Fits inside a standard Fatshark goggles case.
Why give just any gift when you can offer your true heart? ❤ Created especially for Valentine’s Day, it blends the emotion of a real human heart with a minimalist geometric touch. ✅ Fast print – ready in just 30 minutes ⏱ ✅ No supports…
Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.
This is my adjustable version of "exactly indicator". It consists of 2 parts and the original screw is reuse. I designed an adjustment tool to make adjustments easier.
This case is used to store True Hockey Skates runners. It can also be used for other models of runners, like bauer, although I have also made another smaller case for the bauer ones, since the True model is much wider. Checkout my other…
This 3D model posted on printables.com , is a copy of the Mitsugi Ohno true Klein bottle. Here is the story about the “true Klein bottle”. In 1892, mathematician Felix Klein first described the Klein bottle as an object that has a single…
A simple barrel-shaped easy to print bead featuring the coat of arms of Ukraine to support the right cause. 17 mm in diameter and 18 mm in height. 5 mm hole.
This is a 1/3 Scale 3T22A (or 2T22A) with WORKING DAMPERS!!! This siren was a collaboration between Nascarsimracing1 and I This siren weighs approximately 9 pounds! Thank you Jared for modeling this, my old modified Edaan B-core may be…
I didn't find any stand for 3pcs, so I made one. 0.25mm layers 30%infill Feel free to print and use
I wanted a way to visualize and test antenna mounting without paying for the $20 antenna and realizing I mucked up my measurements. Designed to fit a piece of 1.75mm filament to roughly match the coax wire for positioning sake. I liked a…
Adapter for Vantrue X4S dashcam main camera to use 43mm screw on filters, such as a polarizer to reduce glare. Use an m3 hex nut (either normal or nylock) and an m3 thumbscrew like this , cut to size as desired. clamps onto the end of the…
Detroit Truetrac/Quaife style limited slip differential for lego. It's very similar to Torsen T-2, except it uses simpler one section long/tall gears. In my very limited testing, it feels like this has more slip friction than my T-2.…
A glow-in-the-dark lithophane inspired by the Demon Core — the infamous chunk of plutonium involved in two criticality accidents during the Manhattan Project. This model is based on the true size of the core - 89 mm of subcritical mass,…
Connector can either be mounted on the inside or outside. Inside (like on my photos) looks nicer, but leaves less room for the wires (spade connectors have to bent slightly). Can likely be adapted to similar power strips (like the ones…
Knockout Lighting for True Fighters! 🥊💡 Bring the power and energy of the boxing ring into your space with this unique lamp or decor piece. Whether you're a passionate boxing fan, a fighter yourself, or just love bold sports decor this is…
For the true fisherman, every day is a new adventure. Just like waiting for that perfect catch, let this lamp light up your passion a tribute to patience, perseverance, and the love of fishing! 🎣💡 Print files also on! Creality Cloud =…
I took the time to make the legs shorter and thicker as they break very easily. I also made the frosting for the donut come off the bread for the donut a little better, especially if you have a low-quality printer like me. I also made the…
Holds the true control tool in the cap side up position. Print one of each of the files. The fit is somewhat tight depending on your tolerances but should work.
Holds the true control tool in the cap side up position as well as the accompanying 3 other connector pieces. Print 2 hooks. The fit is somewhat tight depending on your tolerances but should work.
This is an adapter fitted for the stainless steel funnels you can buy at IKEA. With this your funnel fits perfectly into truefruits smoothie glasses and it is easier to fill them
I didn't like the ones I could find on the internet to fix the patches to the rail on the VRX4 because I didn't like using double sided tape. I printed it in some tough TPU and for my setup the tolerances where perfect.
This is USE AT YOUR OWN RISK device for a standard Trubeam console, I make no statement about whether or not using this is a good idea. Since the device pops on and pops off as needed, I am personally okay with the use. Therapists can use…
Roblox Blox fruits - TTK Multiple models to print it 'as one' in either the star layout or the holstered layout; or print each one individually with removable scabbard - the Hilts, handle and blade are common. Colour the handles and…
My front disk brake had an incident and was no longer true (straight). I tried to bend it back in right position by using this device. You will need 2 M6 screws and nuts.
the classic meme sign TRUE! with Adachi's head on it. Idk what to write on here honestly. It's a popular meme on okbuddypersona on reddit. I made this make my sign and image to keychain on makerworld.
Basic info This is stand for True Life Compact toothbrush. Maybe some other toothbrushes can fit on this stand but i havent checked it. If you need you can remix it, i will uploud Fusion 360 projekt. On left side is hole for toothbrush…
Even though the WifiLink VRX strongly resembles the HDZero VRX and has similar looking rails, it appears to be a different size. This mount slides onto the WifiLink front rails, holds the TrueRC X-Air. Print vertically with a brim, no…
This design will allow users of HDZERO goggles with X-Air antennas to quickly mount and dismount a Walksnail VRX without interfering with, or removing, existing antennas. The Walksnail VRX mount simply slides onto the sprung pegs on the…
Just a quick tinkercad remix to fit the TrueRC Core and Cherry antennas. I don't have the frame yet, but original dimensions are respected.
Show someone special how much they mean to you with this heartfelt "You Are My True Winner" trophy. 3D printed in a clean, white finish, this elegant trophy features a bold magenta heart on the front of the cup and three matching hearts…
NOTE: Must† be printed up-side-down with organic support on the inside. The scales are tilted to give the bottom edge of each an overhang. †I'm not the boss of you, do whatever you want but this is what worked for me.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A watering can attachment for a True Fruits bottle. The top can be filled up without having to unscrew it. I had…
