True fruits watering can
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A watering can attachment for a True Fruits bottle.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 66
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
Would you like to support my work? :)
Check out my full catalog with exclusives, early access and commercial licences.
—
A watering can attachment for a True Fruits bottle.
The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.
Size: 60 x 60 x 120 mm
This is the V2
Print settings
Required build volume: 60 x 60 x 120 mm
Material usage: 45g
Print time: 4h-5h
Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: a brim if you have bad bed adhesion
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.