1 / 3
Rittal 7240.220 powerCON TRUE1 Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mod to replace the cable of a Rittal 7240.220 power strip with a Neutrik powerCON
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Connector can either be mounted on the inside or outside. Inside (like on my photos) looks nicer, but leaves less room for the wires (spade connectors have to bent slightly).
Can likely be adapted to similar power strips (like the ones without a switch, etc.).
Do this modification on your own risk, make sure the connectors are crimped properly, don't put more than 1 wire in a crimp connector (use something like a wago connector if necessary) and always leave the protective earth wire longer than the other wires.