Counting matching models…
This is a mount for Black and Decker powerconnect 18V batteries for storate on walls or shelves. two versions. one with holes in the wall because I like the look.
An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
You can't get inline Powercon sockets so the only option to extend one is a bulky and expensive coupler. This 3D printed shroud lets you convert a standard panel mount socket into an inline one. Inspired by Joyva on Thingiverse , (I made…
Protective cap for anderson sb175 (stile) connectors; thight tolerances,so it may take a few prints to get right. The flat version does not lock positively unlike the normal version, but is therefore easier to remove from the plug and has…
This is a simple 3D-Printed powerCON TRUE1 to Schuko adapter. It features a Neutrik Powercon inlet and 3 PCE Schuko outlets The design idea was to have a simple, robust and cheap power distributor. It uses long screws instead of inserts…
Fast Coupler Cases that are useful for sound system providers. Use M3 Screw to mount the Speakon or Powercon socket to the coupler case.
WARNING: Construction and use of this model are entirely at your OWN RISK . The finished product is not certified and improper wiring can result in serious injury or death . A simple box for 1 IN and 3 OUT PowerCON / speakON connectors…
PowerCON Buchse: https://www.amazon.de/gp/product/B004BR2Y8O/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 Category: Other
Parts can be printet without support :) Pay attention the case fits your rack panel: Holes are off-center. Refering the sketch below.
I had some stage lights with a C13 IEC plug (Kaltgerätestecker), but I wanted to use PowerCon connectors to power them. To achieve this, I created this PowerCon-T-Adapter, which allows you to connect PowerCon alongside your DMX wires…
PowerCON Buchse: https://www.amazon.de/gp/product/B004BR2Y8O/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 Category: Gadgets
Code ring for color coding PowerCon cables for length. Fits Neutrik PowerCon 20A connectors. ------------------------------------------------------------------ Added version _XXA for the new Neutrik PowerCon connector series.
Use this on the back of female XLR or PowerCon connectors. I use these on the inside of my pedalboard.
This is my remix of this model, which was originally designed to combine the Xiaomi Mi Computer Monitor Light Bar with the Logitech Streamcam. While the original model was excellent, I needed a solution tailored for the Anker PowerConf…
PowerCON Buchse: https://www.amazon.de/gp/product/B004BR2Y8O/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 Category: Other
Just a small helper for raising the Anker C200 Webcam slightly higher to avoid the cam from obscuring the display when using monitors with thin bezels. Prints easily without supports (see pictures for print orientation).
I created this model because is needed simple converter blocks from a powercon blue-white cable to IEC C13 connectors. This block fits a power con panel mount like nac3mpxxa-wot and features a threaded hole on the other side for a PG9…
Use this cover for your Neutrik PowerCon socket. You will need to small metal rods Φ2-2.5mm, length 9-10mm.
Enclosure for Neutrik's NAC3MPX (powerCON TRUE1) inlet. Made to protect back of chassis connector from water, dust etc. Simply add a hole for a wire in a slicer and here you go!
I wanted a way to choose the color of Neutrik Powercon Connectors and use them more like extension cords. So I reverse-engineered the geometry and adapted it to 3D-Printing. There are 6 different models. Powercon_Nut works for all…
Case for POWERCON and SPEAKON that can be strap to light pole truss. 1 Input and 3 output. Best Printed with Heat resistant materials Like ABS.
This gadget help to hold connector during the screw tightening process. Not need to hold in your hand, not will rolling on your working desk under screwing process. "Right hand" version, the label can help to find the correct place for…
I use this adapter on my Makita RT0700C. It's inspired by these models: In-line Neutrik PowerCon socket Neutrik Powercon powercable adaptor (thingiverse)
SRM PowerControl PC7 or PC8 Bicycle Stem Mount Mount for your SRM. I can never find one I like for training. During training I like to have the PowerControl in view, so this will mount the PowerControl on the forks tube, in place of a…
Convert your HAN10 into a powercon connection with this adapter plate. Might work with other D-Size connectors too! Could not be mounted flush due to the depth of the powercon, so mounted it in the Harting 10 housing. Made in Tinkercad
As I Wanted a solution for the cable mess that all my powertools created, I came up with the idea to use the Neutrik Powercon system. Because, for the female side, there are only panel mount versions, I made an adaptor for it. The only…
Was made for stage lights.
PowerCON Buchse: https://www.amazon.de/gp/product/B004BR2Y8O/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 Category: Other
Print this with the threaded side down. I used PETG with no supports nor brim at .20mm layer height on a modified Ender 3, but just about anything will do. For hardware I used some inexpensive Powercon D-style panel mounts and a…
This is a replacement for the stock AC inlet skirt piece that uses a PowerCON AC inlet instead. Fits NAC3MPX-TOP / NAC3MPX-WOT-TOP. Uses the same DPST switch as the regular filtered inlet part.
Tired of IEC connectors falling out? At least for equipment used on professional events, that is a no-go. That's why I created this adapter to replace the factory fitted IEC connector with PowerCON inlet on my box pro Achat 204A (not the…
This is an adapter from 16A CEE plug (the blue ones, known from campsites and construction) to the lovely weatherproof, rugged, reliable Powercon True1 connectors. The design comes from an effort to have a travel-worthy charging setup for…
This is a simple, minimal-but-stable monitor mount for the Anker PowerConf C200 web cam. I wanted it to sit a little lower so I could look directly into the camera when on a Zoom call. It takes up a little bit of monitor real estate, but…
This part replaces the blanking plate in the modular 19" Rittal DK 7240.210 PDU with a module that can hold a Neutrik NAC3PX-TOP inlet-outlet. Installing it involves removing the fixed cable. Obviously, you can recycle the cable with a…
This is a replacement for the stock AC inlet skirt piece that uses a PowerCON AC inlet instead. Fits NAC3MPX-TOP / NAC3MPX-WOT-TOP. Uses the same DPST switch as the regular filtered inlet part.
This was a bigger and more Lol sided project. The goal was to have a Ikea Cart where you can store and charge all of the different Console Controllers out there. To have nothing fixed installed, I thought of my favorite power connector,…
Connector can either be mounted on the inside or outside. Inside (like on my photos) looks nicer, but leaves less room for the wires (spade connectors have to bent slightly). Can likely be adapted to similar power strips (like the ones…
PowerCON Socket Cap – Flexible TPU 3D Model This is a 3D printable PowerCON socket cap , designed to provide protection for unused PowerCON connectors. The cap helps prevent dust and dirt from entering the socket, extending the lifespan…
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
A mounting adapter for installing Neutrik powerCON XX panel connectors in a round enclosure opening. Designed for NAC3MPXXA (blue, power inlet) and NAC3MPXXB (grey, power outlet). Enclosure Dimensions Parameter Dimension Opening diameter…
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
Code ring for color coding PowerCon cables for length. Fits Neutrik PowerCon 20A connectors. ------------------------------------------------------------------ Added version _XXA for the new Neutrik PowerCon connector series.
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
