1 / 5
PowerCon-T
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
T-Connector to use PowerCon with Lamps that have only an IEC-Power Plug (Kaltgerätestecker)
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 112
- Makes
- 1
- Views
- 687
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I had some stage lights with a C13 IEC plug (Kaltgerätestecker), but I wanted to use PowerCon connectors to power them. To achieve this, I created this PowerCon-T-Adapter, which allows you to connect PowerCon alongside your DMX wires while still being able to power those inexpensive lights that lack a PowerCon connector.
The strain relief is printed with 100% infill and available in differen heigths for different cable sizes. Custom sizes can be created with the Parameter in the Fusion360 file.
Screws required:
- 2x M3x16mm Zylinder-Hex Head
- 4x M3x8mm Countersunk-Hex Head
- 4x M3x12mm Countersunk-Hex Head