1 / 1
Neutrik Powercon Connector block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This little block can fit one Powercon panel mount socket and at the other end a cable gland (PG9 thread).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 67
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I created this model because is needed simple converter blocks from a powercon blue-white cable to IEC C13 connectors. This block fits a power con panel mount like nac3mpxxa-wot and features a threaded hole on the other side for a PG9 cable gland.
https://nl.rs-online.com/web/p/cable-glands/8229603
https://nl.rs-online.com/web/p/mains-plugs/2468290
Can be printed without supports. I had best results with the threaded side on the baseplate. Fit the panel mount powercon socket with 2.9mm self-tapping screws.