Cygolite Hotshot Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stripped jmisavage's design for use with a simple L-bracket instead of having extra holes. I had to do a lot of post-…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Stripped jmisavage's design for use with a simple L-bracket instead of having extra holes. I had to do a lot of post-processing with a file to get it to fit. Probably my own setup's fault. Kind of difficult to release the light, but again, probably my own setup.
Imported STL back into SLDPRT, added the rear hex extrusion to support the inset hex head (8 mm size).
Post-Printing
Print it standing up to avoid supports in the channel areas. I needed a thin file to bring the channels to size. DISREGARD: see updates.
Updates
1 Feb 17: Yeah, don't print this standing up to avoid supports along the inside edges of the top "rails". The flexing necessary to release the light will break the mount in two.
Category: Replacement Parts