.50cal Spyder Loader to GOG eNMEy Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
.50cal Spyder Rapid feed to GOG eNMEy in .50cal or w the .50cal Conversion. Also be used with regular .50cal hoppers!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
.50cal Spyder Rapid feed to GOG eNMEy in .50cal or w the .50cal Conversion. Also be used with regular .50cal hoppers! My cousin wanted speed the Spyder Rapid feed electronic hopper on the GOG .50cal eNMEy he was using. I didn't have time to tape it up for him so gravity fed hopper made for eNMEy .50cal it was but I planned on fixing it so here it is. The fit is very tight. I will test it w paint when I get a chance.
The reason it's needed is that the eNMEy uses .68cal feed neck and .68cal hoppers that have adapters in the feed neck to make them work with .50cal. This thing should really sling some .50cal paint let the bruising begin!!!
Printed in PLA but could be printed in PLA+. PETG, ABS, Nylon, PC