P
PrintablesTeo_211
Mclaren 720s Spyder Car Wall Art
Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions
- Pobrania
- 200
- Polubienia
- 45
- Ocena
- 5
Wyniki wyszukiwania: spyder
Liczymy pasujące modele…
P
PrintablesGonun
Knife Sharpener 35° compatible with Spyderco Tri-Angle Sharpmaker
So my dad has a Spyderco Tri-Angle Sharpmaker, but it only has slots for 30° and 40° sharpening angles. He wanted a 35° angle so I made him this holder for it. If someone needs a custom sharpening angle just leave a comment and I'll make…
- Pobrania
- 62
- Polubienia
- 11
- Ocena
- 0
P
PrintablesEucadiz
MR2 Spyder NavPod
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…
- Pobrania
- 699
- Polubienia
- 24
- Ocena
- 4,25
P
PrintablesSezon
Spyderco lanyard bead
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 7%
- Pobrania
- 564
- Polubienia
- 88
- Ocena
- 5
P
PrintablesSpyder
Spyder's MPP Front Shroud ( X-shot AEB motorized piston pump )
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
- Pobrania
- 516
- Polubienia
- 103
- Ocena
- 4,89
P
PrintablesMKT-007
Porsche 918 Spyder
The Porsche 918 Spyder is a hybrid supercar unlike any that you have ever seen. This plug-in hybrid sports car is designed to maximize both efficiency and power, two elements that typically come at a cost to one another. Print your own…
- Pobrania
- 287
- Polubienia
- 21
- Ocena
- 0
P
PrintablesMeister Edel
Spyderco Paramilitary 2 Backspacer
Here I give you my Para 2 Backspacer parts so you can print yourself some too. You can separate the different parts in your slicer. So you don' t need to print them all at the same time :) Have fun and keep printin! It took quite a while…
- Pobrania
- 267
- Polubienia
- 35
- Ocena
- 5
P
PrintablesBrian
MR2 Spyder Pull Strap Covers
Using a old belt I had (see link below for one like it) I replaced the stock hard plastic handle and made covers for the top and bottom opening. Recommend printing in a filament that is UV resistant and Heat resistant. Best way for my…
- Pobrania
- 247
- Polubienia
- 11
- Ocena
- 0
P
PrintablesModel Magic
Miami Vice - Crockett, Tubbs, Elvis & Ferrari 365 GTS/4 Daytona Spyder - 1984
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 230
- Polubienia
- 27
- Ocena
- 0
P
PrintablesMeister Edel
Lanyator : Spyderco Paramilitary 2 & 3 Lanyard pusher
Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…
- Pobrania
- 229
- Polubienia
- 43
- Ocena
- 0
P
PrintablesSpyder
Spyder's Lynx 2.1 Mods
Mod's I've adapted to the unreleased Lynx 2.1 files
- Pobrania
- 226
- Polubienia
- 39
- Ocena
- 5
P
Printablesmarrenmiller
Spyderco Endura 4 Scales
About This Model These replacement scales allow you to customize your Spyderco Endura 4 with any material/color handle choice you'd like. They also forego the subtle finger grooves on the handle, allowing for a more neutral grip that…
- Pobrania
- 202
- Polubienia
- 25
- Ocena
- 5
P
PrintablesEd van der Heijden
Porsche 550 Spyder 1954 Degigner Ed van der Heijden.
Porsche 550 Spyder 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
- Pobrania
- 190
- Polubienia
- 37
- Ocena
- 0
P
PrintablesTeo_211
Porsche Boxster 981 Spyder Wall Art
Wall Art Silhouette model of the Porsche Boxster 981 Spyder. Adjustable size. I accept model suggestions or ideas.
- Pobrania
- 190
- Polubienia
- 33
- Ocena
- 5
P
PrintablesGtscotty
Spyderco Mule Scales - Hidden Lanyard Hole and Textures
This is a modified version of my other Spyderco Mule Team scales, with a hidden Lanyard hole and smooth, solid hex and outline hex surface texturing. These scales were designed around an S45VN blade, I'm not sure what the external…
- Pobrania
- 188
- Polubienia
- 17
- Ocena
- 0
P
PrintablesSabu8
Porsche 918 Spyder Silhouette Wall Art
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
- Pobrania
- 182
- Polubienia
- 30
- Ocena
- 5
P
PrintablesTK_bit_twiddler
Test bolt (M22) for MR2 Spyder (MKIII) tow hook
This bolt was primarily an exercise on how well (and quickly) I could design a threaded bolt in Sketchup Free (web app version) without any plugins. I've got it down to about 5 or 10 minutes. I also have a 2003 Spyder, so I made it the…
- Pobrania
- 170
- Polubienia
- 5
- Ocena
- 0
P
PrintablessleepinDog
Spyderco Mule Team Knife Sheath
Please see this forum post for further information/instruction: I Created a 3D Printed Sheath That Should Work With (almost) All Scales (WORK IN PROGRESS) - Spyderco Forums
- Pobrania
- 170
- Polubienia
- 25
- Ocena
- 5
P
PrintablesThe Snekker Show
Feed Neck for Spyder MR1 Paintball Gun
This is a 45-degree offset feed neck to replace the clear plastic one that comes with the Spyder MR1 paintball gun. It's designed to use the old bolts and nuts, but if you don't have those, you can use 8-32 machine screws and nuts…
- Pobrania
- 168
- Polubienia
- 14
- Ocena
- 5
P
PrintablesMeister Edel
Spyderco Paramilitary 3 Backspacer
Here I give you my Para 3 Backspacer parts so you can print yourself some too. You can separate the different parts in your slicer. So you don' t need to print them all at the same time :) Have fun and keep printin! It took quite a while…
- Pobrania
- 166
- Polubienia
- 35
- Ocena
- 0
P
Printableschappyman66
910 Bergspyder slot body
Took a beautiful, detailed model by Louisdioramas and hollowed it out to make a slot car body in 1/32 scale. It's a very small car, but a great model. Not sure if you can fit a chip in it for digital or not. Category: Hobby
- Pobrania
- 160
- Polubienia
- 8
- Ocena
- 0
P
Printablesben#03
spyderco sharpmaker replica
if you have the tri-angle sharpening stone without the base, you can use my solution. Both angle of 30° and 40° a possible. with the cover you have a space saving storage possibility. I recommend PETG but PLA works fin too. NO SUPORTS…
- Pobrania
- 159
- Polubienia
- 27
- Ocena
- 4,5
P
PrintablesMehTechArt
Porsche 918 Spyder Wall-mounted
Please click ❤LIKE❤ if you appreciate my work 😊 A hybrid hypercar ahead of its time – now as a precision 3D model. This Porsche 918 Spyder wall art captures the iconic silhouette of this legendary roadster, blending elegance and…
- Pobrania
- 153
- Polubienia
- 39
- Ocena
- 5
P
PrintablesAtomMouse
Spyderco Persistence G-10 Custom Handle/Scales
Custom knife Handle/Scales for Spyderco Persistence G-10 Update: 2/10/2026 added a lip to the pivot screw
- Pobrania
- 137
- Polubienia
- 15
- Ocena
- 0
P
PrintablesSflot
Toyota MR2 Spyder/MR-S (ZZW30) Custom Oil Funnel (VASE MODE)
If you want to fill up your oil without having to awkwardly hold a regular funnel or risk spilling oil everywhere, then this is a must have item. This funnel sits snugly in the filling port of your 1ZZ-FE engine while not interfering with…
- Pobrania
- 134
- Polubienia
- 11
- Ocena
- 0
P
PrintablesTeo_211
Porsche 918 Spyder Wall Art
Available remix of the car but with an added roof by @Knaifu69_3341312 available here:
- Pobrania
- 133
- Polubienia
- 30
- Ocena
- 5
P
PrintablesTK_bit_twiddler
Cell phone dock for MR2 Spyder
This is printed in two pieces with a clever method for keeping everything in place and well-shaded from the sun. You open the dash cubby lid, and the upper part of the phone holder snaps securely into the top latch. The bottom of the…
- Pobrania
- 131
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTimo
Spyderco Mule Knife Scales
Handle scales for Spyderco Mule Team knives. Required accessories: 4x M4 nut 4x M4x12 cylinder head screw The nuts do not need to be inserted during printing. I printed the flat models upside down so that the textured surface of the print…
- Pobrania
- 131
- Polubienia
- 18
- Ocena
- 0
P
PrintablesTK_bit_twiddler
Rear grille inserts for 2003 Toyota MR2 Spyder
Left and right grille replacement pieces fit on each side of your rear license plate if you have lost or broken yours. Both include hole for tow hook. (I bought my Spyder used, with some pretty clever carpet square placement, but I've…
- Pobrania
- 130
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDuckinmyhat
Spyderco Para 3 Lightweight backspacer
I printed one good one but I don't think the curve is perfect so I included the f360 file if you improve it please publish the improvements. V2: Improved spline and hole size/placement.
- Pobrania
- 126
- Polubienia
- 23
- Ocena
- 0
P
PrintablesMr. Smith
Can Am Spyder
Nach eine Anfrage auf meinen Can Am Ryker habe ich den Can Am Spyder ebenfalls selbst erstellt. Ich hoffe Euch gefällt das Modell. Ich habe in der V2 Griffe, Rücklicht und Seitenteile etwas geändert. Über einen Ausdruck und Bilder dazu…
- Pobrania
- 124
- Polubienia
- 14
- Ocena
- 5
P
Printablesmodek4
Spyderco Para 3 Lightweight Scales
Scales for Spyderco Para 3 Lightweight. I encourage you to make remixes with patterns. PETG/ASA <0.16mm 100% infill Supports not needed
- Pobrania
- 121
- Polubienia
- 17
- Ocena
- 0
P
PrintablesBrian
Toyota MR2 Spyder HVAC knob
Toyota MR2 Spyder HVAC knob (This may fit other Toyotas of the same gen, not sure). There is a indication hole, and will work fine as is or can put a small diffusing tape over the back.
- Pobrania
- 120
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSpyder
SpyderTek 2.1 Lynx
Edit-There are 2 versions of steps for this. 1 with a trigger guard and one without. I used some of these files as a base for my personal lynx From the Remnant I used the trigger, sear, and pump which I added a ball detent into From the…
- Pobrania
- 118
- Polubienia
- 36
- Ocena
- 5
P
PrintablesMgr. Pavel Krist
LEGO Porsche 910 Bergspyder 1967
LEGO Porsche 910 Bergspyder 1967
- Pobrania
- 116
- Polubienia
- 37
- Ocena
- 0
P
PrintablesH
MX-5 / Miata ND Spyder Grill Teeth
Vampire teeth for your ND Miata! These will only fit the aftermarket Spyder Grill! Just in time for spooky season, help you miot feed on something else than 92 octane and gearboxes. The teeth print in two pieces and attach with zip ties,…
- Pobrania
- 105
- Polubienia
- 43
- Ocena
- 0
P
PrintablesAlexandre
MX-5 ND Spyder Grill Plate Mount
Mount your number plate to the Spyder Grill. Should suit most plates, just position the mounts as needed on the grill or make holes in the plate. Plate will be offset 10mm from grill. Nuts are a push fit into backing plate (use a hard…
- Pobrania
- 99
- Polubienia
- 10
- Ocena
- 5
P
PrintablesOscarW479-3D
Spyder Sammy Roblox Character
I made this inside of Roblox Studio!
- Pobrania
- 94
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDokrull
Spyderco Black Leaf Knife Scales
These are scales for the Spyderco Black Leaf. I've made them to better find my knife in the madness called my desk. They fit not perfectly but do the job. Print the second one mirrored. Feel free to comment, remix and especially to print.…
- Pobrania
- 93
- Polubienia
- 24
- Ocena
- 0
P
PrintablesCaddy80
MR2 Spyder center storage bin phone holder
Ever thought that the center storage bin on the dash of an MR2 Spyder would be a perfect place to mount a phone? Now you can with this simple accessory that clips between the storage door latch and receiver. Height adjustable for…
- Pobrania
- 91
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTK_bit_twiddler
Battery hold-down for Mk3 Toyota MR2 Spyder
This is a three-part battery hold-down. When I bought my used Spyder, the battery was missing the hold-down bracket, so I designed this strong bracket with a customizable emblem socket. The three printed pieces slide together without…
- Pobrania
- 86
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGigaPenguin
Matchbox Porsche 918 Spyder Display
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
- Pobrania
- 83
- Polubienia
- 32
- Ocena
- 0
P
PrintablesLeading Edge
Spyderco Tri-Angle Sharpmaker Upgrades
UPDATED - 4 April 2021 Some upgrades for the Spyderco Tri-Angle sharpmaker system. I have 2 printable platforms with all angles from 20-60 degrees (inclusive sharpening angle, so 10-30 degrees per side). The first platform is 20-42…
- Pobrania
- 82
- Polubienia
- 13
- Ocena
- 0
P
PrintablesGunterlicious
Spyderco Manix 2 XL Backspacer
A back spacer for the Spyderco Manix 2 XL knife. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .28 Infill: 100 Filament: Filacube PLA Green Notes: Infill does not matter much, 10% seemed to…
- Pobrania
- 81
- Polubienia
- 8
- Ocena
- 4
P
PrintablesTK_bit_twiddler
MR2 Spyder no-drill license plate holder
I hate to drill into my car for something as ugly as a license plate. I also hate getting pulled over for not having front plates. I tried mounting my plates inside the front grille, but the A/C (believe it or not) performs really badly…
- Pobrania
- 80
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBrian
MR2 Spyder Pull Strap lower cover
If you've downloaded the MR2 Spyder Pull Strap Covers, but only using the upper cover for a loop style pull strap and want to cover the bottom hole completely.
- Pobrania
- 76
- Polubienia
- 4
- Ocena
- 0
P
Printablespieindaface
Toyota MR2 Spyder (MR-S) Engine Bay Prop Clip
For proper use, print with a material with high thermal resistance. ASA, ABS, PETG, etc. For the SW20, please look at my other models. The size/orientation is a little bit different. This clip was printed so that the prop rod was oriented…
- Pobrania
- 74
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKXNT
Axial SCX10 bead lock Spyder lock 1.9
Fits Axial's 1.9 bead lock wheel. PoisonSpyderRings_V2_1_fixed: recessed holes for screw heads, larger inner circle. PoisonSpyderRings_2: standard bead lock, smaller inner circle. Category: R/C Vehicles
- Pobrania
- 67
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFluffyKoala
Spyderco Sharpmaker Stone Base
Simple base for sharpmaker stones. Has a hole in the bottom to help remove the stones and avoid buildup of crud.
- Pobrania
- 66
- Polubienia
- 8
- Ocena
- 5
P
PrintablesCaddy80
MR2 Spyder Window Wind Deflectors
Simple, but effective wind deflectors for the MR2 Spyder. These wind deflectors redirect turbulent airflow when the windows and top are down. They simply attach between the hard plastic A pillar and rubber window seals. No print supports…
- Pobrania
- 61
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMister K Incorporated
Spyderco Smock Backspacer
This is a simple snap-in backspacer for the Spyderco Smock model. It goes around the original barrel spacers and can be removed by just lifting up and under the tail of the spacer. Category: Parts
- Pobrania
- 56
- Polubienia
- 8
- Ocena
- 0
P
PrintablesINT Craft
Spyderco Matriarch handle
Handle replacement for spyderco matriarch knife
- Pobrania
- 51
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTheFrog69
Toyota MR2 Roadster Spyder Spare Wheel Clamp Cap and Locking Wheel Nut and Stud Holder
Replacement 3d printed cap for a Toyota MR2 Roadster/Spyder, using the original bolt. The spare wheel clamp on my Spyder had rusted in place, and I needed to split the original Toyota cap (with a chisel) to get access to the bolt head to…
- Pobrania
- 49
- Polubienia
- 4
- Ocena
- 0
P
Printablesakinadom
Porsche 550 Spyder Toy Car Wheel
Print tire and rim separately, potentially in different colors. For best results I used a 0.2 mm nozzle, PLA and variable layer height.
- Pobrania
- 49
- Polubienia
- 2
- Ocena
- 0
P
Printablesjon
Toyota MR2 MRS spyder ZZW30 dash USB charger and voltmeter with switch
Made this for my Toyota MR2 (Toyota MRS / Toyota MR2 Spyder) because I don't want to use the typical cigarrette adapters because comes too hot and sometimes doesn't make good connection. With this you can use an excelent buck converter…
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJFL004
Poigné pour ajustement banc Can-am spyder
Poigné d'ajustement pour can-am spyder Version avec multicouleur pour le cap Besoin de support sous la pièce et imprimé avec le centre plein a 100% pour ajouter de la solidité au morceau
- Pobrania
- 40
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAlexey
CANAM SPYDER KEY HOLDER, MARIO MYSTERY BOX EDITION
This is Key Holder for CAN AM Spyder F3 RT. Inspired by Mario's Mystery Box. Used PLA material to print. 2 colors. Used M2x8mm hex bolts. Screwed in right in to plastic, no nuts needed. Can be used with variety of different key rings. Use…
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKendra Tonan
Spyderco Military 2 Backspacer
I created this because I wanted a backspacer for my Military 2 printed at 20% infill with a brim
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKen S
Faceplate for Kenwood KMM-BT332U in a 2003 Toyota MR2 Spyder
I designed this for the aftermarket audio unit that I installed in my 2003 Toyota MR2 Spyder. The dimensions are very specific to my need so I'm not sure how useful it will be to anybody else, but, I'm going to upload it anyway. Maybe…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesConraadsCustoms
Spyderco Kapara Replacement Backspacer & Compression Lock
Spyderco Kapara Replacement Backspacer & Compression Lock 3D model STL - File Only Unlimited personal use Follow me on Patreon for commercial use! https://patreon.com/ConraadsCustoms Features: Compression lock assist - custom contoured…
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesManish Wayz
Fysetc SpyderPi Case
A case for a Fysetc Spyder v2 and Raspberry Pi 3B case with 4010 cooling fans.
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
Printables_Mr_Nocturnal_
MR2 Spyder door stabilizers
Print in TPU, I recommend at least 4 walls and 4/5 top/bottom layers depending on your layer height. These are printed at 60% grid infill and have been holding up for almost 3 years now
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCyberPunk 08/15
Spyder Checkr 24 Kartenhalter (card holder)
Kartenhalter für die Spyder Checkr 24 Fotokarte. Ideal für Produktfotografie in der Hohlkehle oder im Fotowürfel. Benutzte schwarzes Filament, damit es keine unerwünschten Effekte in der Farbkarte gibt!
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKadanae Industries
Toyota MR2 Spyder/Roadster MK3 MR-S 3/4 Side Rear, Engine Bay
Toyota MR2 Spyder/Roadster MK3 MR-S Scan files, one rear side, engine bay with engine on, rear with ductail, and rear JDL bumper with tail lights on. trunk too Category: Automotive
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDvZ_Prints
Spyder Paintball Autotrigger Pump Conversion
Printed parts to build a modern SPump including custom gripframes and Autotrigger mod. Your Marker needs to have a common threaded Low Pressure Chamber/Front Plug to fit the Pump Guide. Tested with the following Markers (Help me expand…
- Pobrania
- 21
- Polubienia
- 8
- Ocena
- 0
P
PrintablesOne More Pickle
Spyderco Sharpmaker 18.5 degree Adapter
Adapter for Spyderco Tri-Angle Sharpmaker converts the 30 degree side to 18.5 degrees. Suitable for sharpening kitchen knives.
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesN8finch
.50cal Spyder Loader to GOG eNMEy Adapter
.50cal Spyder Rapid feed to GOG eNMEy in .50cal or w the .50cal Conversion. Also be used with regular .50cal hoppers! My cousin wanted speed the Spyder Rapid feed electronic hopper on the GOG .50cal eNMEy he was using. I didn't have time…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSHORK
Spyderco Sharpmaker Two Stone Minimalist Case
I was annoyed with the basic case my extra fine sharpening stones came with. I wanted something that would lie flat, keep the stones together, did not rattle, and blend in with my other knife accessories. The tolerances on the model are…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKnaifu69
Porsche 918 Spyder Wall art WITH ROOF
Using Teo_211's design, I added a simple roof and window design to his Porsche 918. Not much else to it! Do beware: the file is a little bit big since i exported it wrong but you can resize it to fit your print bed.
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMirco Slepko
Porsche 550 Spyder 1953-1956 Racing
Porsche 550 Spyder 1953-1956 Racing
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesN8finch
Spyder Detent Holder.
This is a two screw Kingman Spyder Compact 2000 detent holder. It may fit multiple models of Spyder. I hope this helps fix an older marker. I print it rotated 180 degrees so the top looks better. And use supports touching the build plate.…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
Printablesthn00dle
iphone X (10) Spyderco FRN pattern case
You have to print with the pattern and frame separately, and then glue them together at the end will probably collect lots of dust, print with a small nozzle for it to look good I recommend printing it in TPU or a soft material, I printed…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCross
Spyder's MPP Short King (Opened Front)
While the original model is great, the front is closed around the barrel, which doesn't allow for short-barrel + BCAR/PCAR configurations. I've simply hollowed out the front to give more clearance around the barrel.
- Pobrania
- 11
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRoosterFist
Spyderco Sharpener lid tray
this is a lid for the spyderco knife sharpener so you can store all your stones and keep it in one single unit. i lost the original lid and wound up making this to solve the problem.
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEric_Schnutzel
Slazenger Spyder Air Pingpong table net post
Fits quite tightly. Optionally print at 99% scale if you think that's scary. Push hard otherwise. I suggest printing the STEP file as that has true curves unlike the STL. The post will be more round.
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesN8finch
Spyderco Logo Reproduction Molle
MOLLE loop/web with Spyderco Knives logo reproduction for your gear! I wanted some Molle Loop Flair so I mixed a few models and came up with this! My Meta Quest 3 backpack needed an upgrade! So I sliced it for my U1 with some color, see…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
Printableslujes
Supports de clignotants Can Am Spyder
Des supports de clignotants pour le Spyder de Can AM. Faciles à imprimer, pas besoin de supports.Des supports de clignotants pour le Spyder de Can AM. Faciles à imprimer, pas besoin de supports. Pour clignotants en M8, passage des fils à…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRufusBMellow
Spyder 3 Hangar
This is a tool to hold a spyder3 monitor color calibration tool flush with monitor surface. I have a samsung monitor with a deep bezel which made the spyder hang out a bit distance from the monitor surface.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMarcoPipolo
Windshield Vent Insert - Spyder F3 2017
This part is a direct fit for the original windshield of the Can-Am Spyder 2017 version (Other years or model are not guaranteed to fit). Recommended material: ASA-GF Recommended print settings: Support: Tree Slim Print Speed: 50mm/s (For…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTritanium Joe
Spyder Headlight bulb plug
This is probably a very niche problem, but who knows. Someone may find it useful. So I bought new headlights for my 2013 Grand Cherokee and they had this space for a bulb but my car didn't have a bulb to go there. I didn't want to just…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKingofSkies
Spyder Hammer7 Dam Mod Body form
This is a basic geometry model for a Spyder Hammer7 that has been modified for dam magazines. Used to design custom body covers, packaging or cases. Not a functional paintball marker design. Thanks,
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
MX-5 ND Spyder Grill Plate Mount
Mount your number plate to the Spyder Grill. Should suit most plates, just position the mounts as needed on the grill or make holes in the plate. Plate will be offset 10mm from grill. Nuts are a push fit into backing plate (use a hard…
P
Printables
Porsche 918 Spyder Wall Art
Available remix of the car but with an added roof by @Knaifu69_3341312 available here:
P
Printables
Porsche Boxster 981 Spyder Wall Art
Wall Art Silhouette model of the Porsche Boxster 981 Spyder. Adjustable size. I accept model suggestions or ideas.
P
Printables
Spyder's MPP Front Shroud ( X-shot AEB motorized piston pump )
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
P
Printables
SpyderTek x RR Lynx Shroud
SpyderTek Lynx shroud, but with PKI RR muzzle mount. Uses m3 heatset like this: https://www.amazon.com/dp/B07D683Q26?ref=ppx_pop_mob_ap_share&th=1 , or you could get away with Voron inserts, and use m3 x 10mm screws through the muzzle.…
P
Printables
Spyder Paintball Autotrigger Pump Conversion
Printed parts to build a modern SPump including custom gripframes and Autotrigger mod. Your Marker needs to have a common threaded Low Pressure Chamber/Front Plug to fit the Pump Guide. Tested with the following Markers (Help me expand…
P
Printables
Spyderco Sharpmaker Two Stone Minimalist Case
I was annoyed with the basic case my extra fine sharpening stones came with. I wanted something that would lie flat, keep the stones together, did not rattle, and blend in with my other knife accessories. The tolerances on the model are…
P
Printables
iphone X (10) Spyderco FRN pattern case
You have to print with the pattern and frame separately, and then glue them together at the end will probably collect lots of dust, print with a small nozzle for it to look good I recommend printing it in TPU or a soft material, I printed…
P
Printables
Spyder Headlight bulb plug
This is probably a very niche problem, but who knows. Someone may find it useful. So I bought new headlights for my 2013 Grand Cherokee and they had this space for a bulb but my car didn't have a bulb to go there. I didn't want to just…
P
Printables
Porsche 918 Spyder Wall art WITH ROOF
Using Teo_211's design, I added a simple roof and window design to his Porsche 918. Not much else to it! Do beware: the file is a little bit big since i exported it wrong but you can resize it to fit your print bed.
P
Printables
Spyder Detent Holder.
This is a two screw Kingman Spyder Compact 2000 detent holder. It may fit multiple models of Spyder. I hope this helps fix an older marker. I print it rotated 180 degrees so the top looks better. And use supports touching the build plate.…
P
Printables
Spyderco PM2 Cruwear crucarta scale
For Spyderco paramilitary 2 cruwear scales. Note this this design ONLY works with PM2 cruwear since it has a liner
P
Printables
Spyderco Para3 Rhino Emerson Wave Mod
The Rhino Wave Mod is a 3D-printed attachment for the Spyderco Para3 , designed to provide Emerson Wave-like functionality —allowing for lightning-fast, one-handed deployment when drawing the knife from your pocket. After extensive…
P
Printables
Pocket sharpener for Spyderco tri-angle stones
I have once dropped my Spyderco Tri-Angle sharpening kit and broke one of the stones. To make use of the broken stone I made these caps. These when put on the end of the stone retain the original 40-degree angle. Although this setup is…
P
Printables
Spyder MK8 Hotend for Ender NG
I have been using the MK8 Spyder on my Ender 3 pro for about a year, and used it to print all the parts on my Ender NG. Its been a good hotend for me and I wanted to use it on the NG. Its a bit bigger than the stock MK8 hotend so I grabed…
P
Printables
918 Spyder
The Porsche 918 Spyder is a high-performance hybrid supercar made by Porsche. It combines a powerful V8 petrol engine with electric motors , giving extreme speed while still being efficient. The car has a sleek aerodynamic design , a low…