Spyderco Tri-Angle Sharpmaker Upgrades

UPDATED - 4 April 2021

Some upgrades for the Spyderco Tri-Angle sharpmaker system.

I have 2 printable platforms with all angles from 20-60 degrees (inclusive sharpening angle, so 10-30 degrees per side). The first platform is 20-42 degrees (10-21 per side) and the second one is 44-60 degrees (22-30 per side).

I also have 19 individual adapters to enable sharpening your knives at any angle between 10-30 degrees per side with your existing Spyderco Sharpmaker (20-60 degrees inclusive angle). You will have to print 2 of each angle you want.

The individual adapters simply slot into the current 30 degree angle slots of your Spyderco Tri-angle base, and your Tri-angle rods slot into the adapters.

In the below link you will find my adapter for using the Spyderco Tri-Angle ceramic rods with a Lansky sharpening system:

https://www.thingiverse.com/thing:4736877

If you like my designs, please send me a tip (link below) so I can keep designing awesome accessories for free. I use any money sent to me for purchasing filament to test my designs so I can make sure they are good to go.

paypal.me/leadingedge777

UPDATES:

10 Feb 2021 - I changed the design to enable the use of the brass hand protection rods, and I added angles from 52-60 degrees (25-30 degrees per side)

4 Apr 2021 - All files replaced with new ones, some of the spyderco tri-angle rods fit was too tight, so I re-designed them with slightly bigger slots to accommodate all of the different spyderco rods (White and Brown).

NOTE:

My 3D printable sharpening system to sharpen just about anything you can think of:

https://www.thingiverse.com/thing:4135236

My other useful designs:

https://www.thingiverse.com/leadingedge/designs

Print Settings

Rafts:

Yes

Supports:

Resolution:

0.2

Infill:

Filament: PLA PLA

Notes:

Category: Tools