Nitecore TIP SE diffuser and button protector.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nitecore TIP SE flashlight diffuser and button protector.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A light diffuser and button protector for Nitecore TIP SE flashlight.
A minimalist, lightweight flashlight “lantern” for ambient light in the tent or hammock.
The diffuser has two positions.
Collapsed/pushed all the way in = button protector, so the light doesn't turn on by mistake.
Extended = Light diffuser.
There are tabs on the print that fit into the notches in the side of the flashlight.
I used a generic transparent PLA. (Clas Ohlson, here in Sweden)
But any transparent filament will most likely work well.
Wall-thickness is 1.4 mm.
Thin enough to allow light through. Thick enough to protect the buttons.
Version 5 has a more loose fit. Version 6 is a bit tighter (perfect on the flashlight I've got).