Nitecore TIP SE diffuser and button protector.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nitecore TIP SE flashlight diffuser and button protector.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 67
- Makes
- 0
- Views
- 831
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
A light diffuser and button protector for Nitecore TIP SE flashlight.
A minimalist, lightweight flashlight “lantern” for ambient light in the tent or hammock.
The diffuser has two positions.
Collapsed/pushed all the way in = button protector, so the light doesn't turn on by mistake.
Extended = Light diffuser.
There are tabs on the print that fit into the notches in the side of the flashlight.
I used a generic transparent PLA. (Clas Ohlson, here in Sweden)
But any transparent filament will most likely work well.
Wall-thickness is 1.4 mm.
Thin enough to allow light through. Thick enough to protect the buttons.
Version 5 has a more loose fit. Version 6 is a bit tighter (perfect on the flashlight I've got).