P
PrintablesRonald Lokers
NiteCore MH12GT - 25.4mm light diffusor
A diffusor that can be used with the NiteCore MH12GT or any other flashlight that has a head of 25.4mm wide.
- Downloads
- 40
- Likes
- 3
- Rating
- 0
Search results: nitecore
Counting matching models…
P
PrintablesSteveW91
Belt Clip for Nitecore EMR06
Print in PETG for added strength and flexibility
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
Printablesandyshinn
Nitecore NU05 V2 Molle Clip
This is a simple molle clip I made for the Nitecore NU05 V2. The clip on the light kept popping off my backpack. I made this to stay clipped on much better. Print in PETG so it has some flex without breaking while you attach it to molle…
- Downloads
- 21
- Likes
- 3
- Rating
- 5
P
PrintablesJan Ptáček
nitecore light cap clip
držák na světlo na čepici nebo k přichycení k čemukoliv. řeší problém jednostranného klipu. doporučuji tisknout na výšku.
- Downloads
- 18
- Likes
- 6
- Rating
- 0
P
PrintablesConSi
Nitecore MH12 adapter for GoPro mount
This adapter allows you to securely mount a Nitecore MH12 flashlight using any standard GoPro mount . Designed specifically for the MH12 model, it ensures a firm hold even in demanding conditions such as mountain biking. For full…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesvi_psal
Nitecore HC30 Headlamp Diffuser
printed with transparent ABS-T
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesMeow
Nitecore P20i Anti-Press Cap
A cap for Nitecore P20i. Reduce chance for accidentally press power button when in pocket/backpack. Since it happen to me many times already. I put it inside my backpack. But when I use it almost run out of battery, due to it accidentally…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablesveikus
Picatinny rail flashlight mount (Nitecore EC20)
Mount for a Nitecore EC20 flashlight (21mm diameter). You will also need: 2x M3x30mm bolt, 2x M3x12mm bolt, 4x M3 nut
- Downloads
- 510
- Likes
- 71
- Rating
- 5
P
PrintablesMeister Edel
AAA & AA Akku Battery Riser Nitecore D4 Digicharger and others
This is my version to rise AA & AAA batteries so they can charge properly. There is a grip area to remove the riser easily. The "bottom" part of the riser is flat to enable a good access to the batteries. It is also possible to leave the…
- Downloads
- 148
- Likes
- 31
- Rating
- 5
P
PrintablesPiro
NiteCore EDC27 RIS Adapter
NiteCore EDC27 RIS Adapter This adapter allows you to mount your EDC27 flashlight to any RIS you have, making it in instant an tactical light. You can use clips to secure it on no recoil/low recoil devices, or use 2x M3 DIN912 screws to…
- Downloads
- 129
- Likes
- 10
- Rating
- 0
P
PrintablesHeady1898
Flashlight/torch bezel openers - Noctigon KR4/KR1, Emisar DW4, Emisar D1(v2), JetBeam RRT-01, Nitecore EC4(S), FireFlies SS AA
This is a set of different tools to help flashlight bezel removal. I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height. This is a growing collection, so feel free to check back later for tools for…
- Downloads
- 119
- Likes
- 22
- Rating
- 5
P
Printablestaeraeyttaejae
Lumintop GT Nano/pro, Nitecore tiki, Olight IR2 EOSo eyeglasses clip
Always bumping on things in the dark is in the past - clip on this small thingamajig on ye flashligt and be done with em problems! Wife complains about silly headlamp - SLAP ANOTHER LIGHT ON ANOTHER SIDE OF YE GLASSES AND ZOOM AWAY! With…
- Downloads
- 100
- Likes
- 9
- Rating
- 0
P
PrintablesPignouf
Nitecore NU25 UL bike mount
A bike mount for the Nitecore NU25 UL. Use a ruberband for fix it. 20+% infill 0.2 mm layer height 🤙🤙🤙
- Downloads
- 100
- Likes
- 11
- Rating
- 0
P
Printables3Ddoofus
NiteCORE Cinewind CW20 remixed tips like WolfBOX MF100
I purchased both the NiteCORE CW20 and the WolfBOX MF100. The NiteCORE quality is leaps and bounds better although slightly less powerful / cfm. I modeled the 12mm tip after the WolfBOX and still wasn't as happy, so I remixed the 10.5mm…
- Downloads
- 97
- Likes
- 13
- Rating
- 5
P
PrintablesFlux Liquids
NITECORE I4 D4 CHARGER WALLMOUNT
NITECORE CHARGER WALLMOUNT
- Downloads
- 96
- Likes
- 4
- Rating
- 5
P
PrintablesDimzila
Nitecore NU25/NU 25UL MOLLE adapter
Легкий (около 8,5 г на рекомендованных настройках печати) и прочный MOLLE адаптер для Nitecore NU25(V2)/NU 25UL. Эта модель сохраняет оригинальную систему регулировки наклона лампы и доступ к порту зарядки для работы от повербанка.…
- Downloads
- 88
- Likes
- 13
- Rating
- 0
P
Printablesjowlo
Nitecore NU25 UL Bike Helmet Mount
This is a bike helmet mount to fit the Nitecore NU25. I adapted the rather bulky design and changed the angle so that it works in a more aggressive position on the bike. It should fit for the UL and non-UL variant. I glued a small piece…
- Downloads
- 84
- Likes
- 5
- Rating
- 0
P
PrintablesJan Rezac
Nitecore Tube light clip
Clip for the Nitecore Tube keychain light (tested with version 2.0, but the original one should have the same dimensions). Intended for attaching the light to a cap brim to turn it into an ultralight headlamp. The thing consist of two…
- Downloads
- 82
- Likes
- 16
- Rating
- 0
P
PrintablesYaroslav Varshavskyi
Nitecore EDC27 GoPro mount
Print settings: 0.6 Nozzle TPU Wall loops: 2 Infill density: 100% Infill pattern: Rectilinear Support: True Type: Tree If you need the STEP file, please contact me.
- Downloads
- 82
- Likes
- 14
- Rating
- 0
P
PrintablesRufusBMellow
Nitecore TINI 2 Case with access
Remix of Nitecore TINI 2 case, but with access to the screen, buttons, and lights, so that it does not have to be removed for use. Category: Tools
- Downloads
- 79
- Likes
- 11
- Rating
- 4.5
P
PrintablesSynaptic84
Nitecore EDC27 Tailswitch Guard
Tailswitch guard for Nitecore EDC27. It replaces the original plastic that goes together with the clip. As I didn't find any "ready available" tailswitch guard model for the EDC27, I made one myself and wanted to share it here. There are…
- Downloads
- 72
- Likes
- 16
- Rating
- 0
P
PrintablesPeter Welch
Nitecore 21700 Battery Case – Weatherproof & TPU-Protected
Carry your spare 21700 battery for the Nitecore P20iX with confidence using this custom-designed case. Built with precision, this case accommodates Nitecore NL2150HPi and NL2153HPi batteries securely, providing both protection and weather…
- Downloads
- 67
- Likes
- 9
- Rating
- 0
P
PrintablesRichard
Nitecore TIP SE diffuser and button protector.
A light diffuser and button protector for Nitecore TIP SE flashlight. A minimalist, lightweight flashlight “lantern” for ambient light in the tent or hammock. The diffuser has two positions. Collapsed/pushed all the way in = button…
- Downloads
- 67
- Likes
- 22
- Rating
- 5
P
Printablesfirstgizmo
Nitecore HC65 Headlamp Head Strap
This part replaces the headrest on the Nitecore HC65 headlamp. Its function is exatly same as the original. Printing: The SidePieces are to be printed from flex material. Made mine from TPU 98A and it works verry well. The Headrest is…
- Downloads
- 62
- Likes
- 10
- Rating
- 0
P
PrintablesKytor
Nitecore HC30 Headlamp Headband Strap Mount
I would recommend printing in PETG or Polycarbonate.
- Downloads
- 58
- Likes
- 12
- Rating
- 0
P
PrintablesSzoog
NITECORE D4 EU Wall Mount
I found @FluxLiquids wall mount for the Nitecore D4. But as written by someone in the comments there, the EU version of the D4 seems to be a bit beefier. I took the original model and just used the slicer to resize it. I also added a…
- Downloads
- 57
- Likes
- 3
- Rating
- 0
P
PrintablesTR Customs NJ
Nitecore P20iX Tactical Flashlight Holster
Nitecore P20iX Tactical Flashlight Holster
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
PrintablesThe Wanderer
Nitecore EDC25 Holster
Just a holster for the EDC25 flashlight. As far as I know, there is nothing like this so now there is I should get around to printing it soon… Please check out my other models.
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesSaow
Nitecore charger - AA riser
I have this Nitecore charger that can take AA, AAA, 18650 and other batteries. When charging AA batteries, sometimes its hard to make them connect correctly, you have to rise them a little so they align perfectly with the metal…
- Downloads
- 50
- Likes
- 10
- Rating
- 0
P
PrintablesFelipe Aguayo
Nitecore NU25 Cap Mount
Cap mount for the Nitecore NU25 (2017) headlamp. Print on its side with supports. I used organic supports. Inspired by the Insta360 GO cap mount
- Downloads
- 49
- Likes
- 5
- Rating
- 0
P
PrintablesDocHertz
Nitecore Digicharger D2 Wall mount
Wall mount for Nitecore digicharger D2. Cut-outs for buttons and ports. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 100 Filament: 3DE Premium PLA Black Notes: The file has some…
- Downloads
- 49
- Likes
- 8
- Rating
- 4.5
P
PrintablesDRAXX
AA and AAA Riser for Nitecore Digicharger D2
Inspired by, but not a remix of, or as nicely designed as https://www.printables.com/model/177142-nitecore-d4-digicharger-aaa-aa-akku-battery-riser
- Downloads
- 49
- Likes
- 7
- Rating
- 5
P
Printablessilviu
Nitecore TINI2 Cover - Difuser
For me it was a smidge loose - but it was late and also didn't feel like printing it again. I used a small heat gun to bend the ends a little towards each other. Depending on printer you might want to try 99% or heating the ends like me.
- Downloads
- 48
- Likes
- 13
- Rating
- 0
P
Printablesaratsu
Nitecore HC65 GoPro mount
I made this to utilize HC65 unit as my bike light. The separate pieces are slided from both ends and then kept together by GoPro attachment. In the pictures the mount is attached to Garmin-GoPro Adapter…
- Downloads
- 47
- Likes
- 2
- Rating
- 0
P
PrintablesZakoplex
Nitecore NB10000 Gen2 Accidental button press protector.
It's a simple cover to help prevent the dreaded NB10000 accidental long button press that disables the battery. Easy quick TPU print.
- Downloads
- 45
- Likes
- 8
- Rating
- 5
P
Printablesder_matze
Nitecore Tiki magnetic ultralight headlamp adaptor
Background and options I searched for a ultralight trekking headlight and decided to use my nitecore tiki ( LINK ) wich is ultralight and super useful: extra small and ultra light almost watertight - rainy weather is not a problem (IP66…
- Downloads
- 40
- Likes
- 15
- Rating
- 5
P
PrintablesDRAXX
AA and AAA Riser for Nitecore Digicharger D2 Single Battery
Single battery riser for AA and AAA batteries In the Nitecore Digicharger D2.
- Downloads
- 40
- Likes
- 7
- Rating
- 5
P
PrintablesJason Boi
Nitecore MT2C Pro - Helmet clip (GoPro mount)
I do night rides on my local trails and didn't want to spend on a bike specific light. Since i have the Nitecore MT2C Pro, i opted to use that as the helmet mount light since its mighty bright. Clips the Nitecore MT2C Pro (or any 21mm…
- Downloads
- 38
- Likes
- 11
- Rating
- 0
P
PrintablesTim
NiteCore HC65 GoPro Adapter
I designed this mount some time ago to attach the Nitecore HC65 headlamp to my bike helmet as a alternative to a GoPro. I printed it in polypropylene, which adds just the right amount of flex, making it easy to snap the light into place…
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesAdam
Travel switch cap for Nitecore HC68 headlamp
This is a cap to prevent the Nitecore HC68 's switch from operating during transport in a bag or luggage. Printing instructions Print the .stl file as oriented, in flex material If the fit is not perfect (variations in printers and…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
PrintablesВалерий
Nitecore Nu 25 Old headlamp mount
A head mount for the Nitecore nu 25 Old c flashlight with powerful locking devices to prevent the flashlight from falling down.
- Downloads
- 34
- Likes
- 4
- Rating
- 5
P
PrintablesDnih
Skadis support for Nitecore CW20
Skadis support for Nitecore CW20
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesHängemattis
Nitecore NU20 Classic - Bike Mount
A bike mount designed specifically for the Nitecore NU20 (Classic) headlamp, created as a practical solution for riders looking for a ultralight, USB-C rechargeable bike light. The mount securely holds the light while allowing quick…
- Downloads
- 33
- Likes
- 0
- Rating
- 0
P
PrintablesBas
Clips for Nitecore NU05-V2
Clips for mounting the Nitecore NU05-V2 light on fabrics, like a nylon strap, molle system. Available in and open and closed back version and for two different thicknesses a “fabric” ±0.5mm thick fabric (e.g. molle system on the nitecore…
- Downloads
- 32
- Likes
- 4
- Rating
- 5
P
Printablesnilsh264
Nitecore E4K Skadis
A simple IKEA skadis holder for the Nitecore E4K Print Settings: 0.4 nozzle 0.2 layer height printed with supports material used: PLA+
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesSano
HSW Nitecore SC4 mount
Very easy mount or holder for batteries charger NitecoreSC4 on the HSW system. HSW - https://www.printables.com/cs/model/152592-honeycomb-storage-wall/files
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesSchlachtschiff
Nitecore Tini2 flashlight Clip
Nitecore Tini2 flashlight Case whit Clip for Cap mount.
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
PrintablesPhazeShift
Nitecore P20iX / P20iUV Pocket Protector
I use the P20iX as a EDC flashlight and always carry it in my left pocket. Over a few weeks it managed to tear a hole into one of my pockets, because of this i made a small rounded protector cap which can be clipped on to the P20iX and…
- Downloads
- 30
- Likes
- 3
- Rating
- 5
P
PrintablesInquisitiveLion
Nitecore UI2 18650 Charger Mounting Bracket
A mounting bracket for the Nitecore UI2 18650 rechargeable battery charger. Vertical bracket for drywall/wood screws to free up those precious horizontal surfaces that we all treasure. Print vertically, only need supports on the wings,…
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesStoleYourBurger
Nitecore Charger Holder for IKEA Skadis Pegboard
The mount provides a snug fit for the charger and allows for easy access and removal while keeping your workspace organized and your charger safely in place. Designed specifically to fit the form factor of the charger, it holds it…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesStil
Nitecore TUP protect case
I'm put the torch from the hole marked with red arrow.
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesMHdesigns
Buttoncover/wall for Nitecore P10i flashlight
Extends the flashlights body to reduce risk of miss pressing of on/off button. Button is visible and functional over wall for ease of use. It doesn't protect button fully but decrase chance that button is pressed without intension.…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
Printablesfredric100
Glare Shield for Nitecore Thumb
The Nitecore Thumb is an excellent submini hands-free rechargeable flashlight. But when clipped to the chest, the hemispherical lenses cast light directly into the eyes of the wearer, even at maximum forward tilt of the light. This shade…
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
PrintablesAnarxus
Nitecore TUP airsoft picatiny mount
An enclosed mount for a Nitecore TUP flashlight for picatinny rails. Ideal for airsoft pistol. All controls, screen and charging port are exposed so that you don't have to remove it every time.
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesFelix Wurm
Nitecore TM 28 bezel removal tool
I had a broken Glass on my Nitecore TM 28, so I design this part to safely remove the front bezel. Print Settings: I used PETG, 0.15mm For optimal layer adhesion, I recommend printing at least 250C, and slow printer movement.
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesCitruspers
Nitecore TIP flashlight shell
A replacement shell for the Nitecore TIP (V1). 1mm thick, 0.5mm detail, should work on both MSLA and FDM. No supports needed. In order to get maximum transparency using MSLA I used a clear resin (Anycubic Clear), printed the object flat…
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesNo Name
Nitecore UM4 wall mount
Snug fit wall mount. Fastened to wall (or wherever you want) with two screws.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesTazMataz
Nitecore UM4 UMS4 Multiboard edition
print with support for the mount, but only critical areas above the build plate.
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
Printablesnilsh264
Nitecore T4K Skadis
A simple IKEA skadis holder/stand for the Nitecore T4K Print Settings: 0.4 nozzle 0.2 layer height printed with supports material used: PLA+
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesFelix Fischer
Gridfinity Nitecore FX1 Holder (+ Fujifilm NP-W126S Battery)
The footprint of this model is 2x2.5, so it essentially occupies 2x3 gridfinity units. The main compartment holds the Nitecore FX1 charger for Fujifilm NP-W126S batteries. I modified mine to take usb-c from the side, so there is a cutout…
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesSandfrog
AAA to Nitecore D2/D4 Load Adapter
Fix for the Nitecore D2/D4 Loader Category: Electronics
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
Printablesjcamping
Nitecore EDC23 Gridfinity
Holds the Nitecore EDC23 flashlight, with some play in the container. Could be a bit more snug, but I didn't want to print it a second time.
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesF Engineering
Diffusor for Nitecore MT21C
Simple diffusor for Nitecore MT21C. Suction fit on either end of the flashlight. Vase mode Einfacher Diffusor für Nitecore MT21C. Saugende Passung für beide Enden der Taschenlampe. Vasenmodus
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesRyan Bushue
Nitecore NU25 UL Cap Clip
I printed with tree supports in PLA and it seemed to turn out pretty well. I'm sure I'll need to reprint in a sun/heat resistant material in the future but this was more of a proof of concept.
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesAdam
Nitecore NU05 v2 mounting bracket for bike rear pannier rack
This innovative mount clamps around the 8.2mm structural tubing of my bike pannier rear rack and support for the Nitecore NU05 v2 light. My rack is a Filzer PR-5 from MEC (Mountain Equipment Co-op), from about 10 years ago. It looks…
- Downloads
- 15
- Likes
- 8
- Rating
- 0
P
PrintablesMarkus Winkler
Nitecore MH23 Cover
Cover for the Nitecore MH23 and sure other models with the same diameter. with PETG no issues of deforming by full power mode. 0.2 layer 240/70 temperature PETG additional feature with Cura fuzzy skin (outside!)
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesW. Daniel Bell
Nitecore TIP Mount
I tried using the original design on my Walther P99, but it ended up flinging my NiteCore TIP down the range. This remix handles the recoil from my P99 quite well. I am now using this mount with my Nitecore instead of a StreamLight which…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesRazvan Constantin
Nitecore EA41 bike holder
Designed and tested to fit on this model of flashlight only. Others might fit also. You only need two tie wraps to fasten it to the handle bar. The mount holds the flahslight tight and you can remove it from the mount with a bit of force…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
Printablesjestem_andrew
Nitecore HA15 UHE Replacement Strap Mount
A replacement headlamp stramp mount for the Nitecore HA15 UHE. Features: Strap holes for secure fitment Thicker design to prevent snapping Perforated rotation circles for more precise headlamp angle adjustment Additional space to fit…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesTune
Nitecore NTH 20 Replacement clip
Getestet mit 0,4 mm nozzle und 20mm layer hight und 15% infill
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesThomas Förster
Nitecore HC65 V2 Button Guardring Lens Protection Cover
Made a Remix from crisb's nitecore-hc65-v2-protection-cover to accomodate for the button guardring that I glued around the button to protect it from accidentially switching it on. Print in ABS FusRock GF 10% also works fine, did not have…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesTeddynoon
Nitecore TIP3 button lock
Button lock for the Nitecore TIP3, as I couldn't find it anywhere. The TIP3 locks with the available buttons, but I found out multiple times it unlocks in my pocket, the light turns on and it drains the battery (and of course always when…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printablesjamesmakin
NiteCore DigiCharger D4 NCell adapter
The NiteCore D4 digicharger can't recharge NCells properly because the minimum contact position is like 0.5mm too short, and the batteries drop down too low and fall below the bumps and it is a very dodgy connection that needs some…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesSchlachtschiff
Nitecore Tini2 Armband
Armband für die Nitecore Tini2. Link zum Armband (20mm): https://de.aliexpress.com/item/1005006978916568.html
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
PrintablesWizavich
Battery Charger Cover for Nitecore Intellicharger New i2
I made a cover for my Nitecore i2 Battery charger as I didn’t like the fact that the batteries were exposed and could easily be knocked out of place. The cover snaps in place and can easily be removed. I also made sure it was not fully…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesClickModder
Nitecore MT-1C Ring
A tool to help the grip on a nitecore MT-1C light
- Downloads
- 10
- Likes
- 3
- Rating
- 5
P
Printableslilmoomoo
NITECORE NB10000 Gen4 Power Bank TPU Case
TPU protective case for the NITECORE NB10000 Gen4: two versions, one with a MagSafe ring and one without. Printed using Siraya Tech FLEX TPU Air at 70A setting. 2 walls, 15% infill. Prints upright with no supports needed for both…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesJan Ptáček
podložka spony svítilny Nitecore
Podložka se umístí mezi sponu a tělo svítilny. Světlo se zasune do kapsy asi o 1cm hlouběji. doporučuji vytisknout z PET-G pro částečnou pružnost. A pokud je výška nevyhovující tak se snadno nastaví ve sliceru, přes scale.
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesBuildNotBought
Nitecore Tip 2 mount for bicycle
Bicycle mount for Nitecore Tip 2 flashlight. Glue in two 6x2mm magnets for secure hold and cover them with the cap.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesZakoplex
VE7ZAX QMX Battery Stand Clips for Nitecore NB Air battery
Simple and minimal clips for the QRP Labs QMX that let you use your Nitecore NB5000 Air power back as a stand making a tidy setup. Posting for the nine other people that have a QMX and a Nitecore NB5000 Air. Thanks for any likes and…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesВалерий
case for Nitecore nu 25
A case for the new Nitecore Nu 25 flashlight. It fits both the previous model and the MCT. Currently, the model has a wide mount. Everything is assembled with glue.
- Downloads
- 8
- Likes
- 1
- Rating
- 4
P
PrintablesChV
Nitecore NU20 body holder
Replacement for original part that is easily broken. Was tested in a few hikes
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesShnejdy
Nitecore TIP bicycle mount
Case for Nitecore TIP flashlight that slides onto existing Kelly's light clamp mount or similar type. Printed from PLA, but PETG or ABS would be probably better as the cap fit can get loose over time.
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesDanistics
Nitecore charger stand
Sorry for the orientation, but easy enough to rotate it on the print bed in your slicer
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablesdreimal_8
Nitecore TUP diffusor
Because the diffusers I found on thingiverse do not fit well on my nitecore tup (they go too hard to slide on the lamp) - I made a new one. It fits on my lamp and leaves the display free. No support and opening upwards - in my case in…
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
Printablesanhte
Nitecore CW20 fan Bottom cover
There're 2 options: Normal cover using PLA, PETG (No support needed), Fit cover to print with TPU or flexible filament (Support enabled)
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesjschroeck
Nitecore P10 Safety Clip
This clip ensures that the flashlight can't be turned on when being transported, which could be a fire harzard. Partially unscrew the back of the flashlight and apply the clip to visually confirm this is done and make sure it's not…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesblade42
Wall Mount for Nitecore Battery Charger
Wall mount for Nitecore Superb Charger SC4 battery charger. Printed in PETG for a little flex and resilience, but PLA/ABS, etc should be fine.
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesCausality
Nitecore Intellicharger i4 Multiboard mount
Nitecore Intellicharger i4 Pegboard Mounted Holder remixed from Ahmad AlAmrey's model together with the Multiboard Pegboard Click Hook. Print with supports
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesroyci
Nitecore NB10000 Gen1 Accidental button press protector
Remix of Zakoplex's NiteCore NB10000 Gen2 Accidental Button Press Protector, with modified button slot. Printed on an MK3S+, 0.4 nozzle, 0.2 quality. Sainsmart 95A TPU. Sized the model down to 98% to make it fit more snug.
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesEirik Jeppesen
Nitecore Intellicharger i4 mount
Print two - one for top and one for bottom. If you just want to attach it directly to a wall, use these attachment points . The hole spacing is at 25mm intervals. You will minimally need two of those mounted 100mm apart vertically. For…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesForge3D by Keystone Core
Nitecore P23i GoPro-Style Mount Adapter
Nitecore P23i GoPro-Style Mount Adapter A 3D-printable adapter for mounting the Nitecore P23i flashlight to standard GoPro-style mounts. Compatibility Designed and tested for the Nitecore P23i . Official reference specifications: Length:…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesSubsonicMike
Nitecore Cinewind Air blower french cleat hanger
A simple hanger for a french cleat to keep my Nitecore air blower within easy reach in the workshop. The hanger locks onto the french cleat to stop it getting knocked off in use and can be adjusted to fit between a 66 and 78mm cleat.…
- Downloads
- 4
- Likes
- 2
- Rating
- 0
P
PrintablesDieterM
Powerbank stand for Nitecore NB10000 Gen 2 and 3
Powerbank holder for the Nitecore NB10000 Gen 2 and 3. Print in PLA 0.4 Easy print, perfect size and very stable.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesAdam
Mounting system for Nitecore NU05v2 light to Lazer Nutz Kineticore 2.0
This model has not undergone any safety testing and is provided for demonstration purposes only. Read and follow all instructions for the bike helmet. Contact the manufacturer of the bike helmet for guidance before adding any accessories.…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesmcducx
SUP fill adapter for nitecore CW20
Fill adapter for nitecore CW20
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesJustForFun
Nitecore HC65 clip handle and head bracket replacement
Looking for a replacement mounting solution for your Nitecore HC65? You're in the right place. Due to the original rubberized headmount's age and degradation, I've created an alternative mounting solution for the Nitecore HC65 that could…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesfA482073
Nitecore EDC07 Lightbulb Diffuser
Introduction: This diffuser converts the Nitecore EDC07 flashlight into a portable light bulb. It produces a soft diffused light with no artefacts, ideal for illuminating an entire area or room. Also works well when clipped to the outside…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesFelix Fischer
Clip-on Button Cover for Nitecore HC65 V2
This cover can simply be snapped on to your Nitecore HC65 V2 to prevent the headlamp from accidentally turning on while transporting it. While not in use, you can store the cover by clipping it on to the opposite side of the headlamp, so…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
Printables
Nitecore TUP airsoft picatiny mount
An enclosed mount for a Nitecore TUP flashlight for picatinny rails. Ideal for airsoft pistol. All controls, screen and charging port are exposed so that you don't have to remove it every time.