1 / 2
Nitecore NU05 v2 mounting bracket for bike rear pannier rack — image 1
1 / 2

Nitecore NU05 v2 mounting bracket for bike rear pannier rack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This innovative mount clamps around the structural tubing of a bike rack and provides a support for the NU05 v2 light.

Rating
0 / 5
Likes
8
Downloads
15
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This innovative mount clamps around the 8.2mm structural tubing of my bike pannier rear rack and support for the Nitecore NU05 v2 light.

My rack is a Filzer PR-5 from MEC (Mountain Equipment Co-op), from about 10 years ago. It looks identical to this one being sold there now: https://www.mec.ca/en/product/6029-151/mec-rear-bike-rack

Design features

I've designed this to be small, with minimal openings on top where water can accumulate.

Required hardware

  • One M3x12 socket head bolts
  • One M3 DIN 562 square thin nut

Printing and assembly tips

  • Print the mount as oriented in the .stl files, using flex material. (It prints upside down.)
  • There is a small rectangular opening at the bottom, to accommodate the M3 DIN 562 square thin nut.
  • Slide the nut in gently. You can use the M3x12 bolt to push it in. If it's loose, you can add a drop of glue after it's inserted
  • Place the mount over the tubing on the bike rack and screw in the bolt until it's tight.
  • Insert the NU05v2 as you would with it's bike mount. It will “click” into place.

Notes

  • If your bike rack tubing is close but not a perfect match, let me know and I can probably adjust the model for you.

Tags