1 / 2
Nitecore NU05 v2 mounting bracket for bike rear pannier rack — zdjęcie 1
1 / 2

Nitecore NU05 v2 mounting bracket for bike rear pannier rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This innovative mount clamps around the structural tubing of a bike rack and provides a support for the NU05 v2 light.

Ocena
0 / 5
Polubienia
8
Pobrania
15
Wydruki
0
Wyświetlenia
124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This innovative mount clamps around the 8.2mm structural tubing of my bike pannier rear rack and support for the Nitecore NU05 v2 light.

My rack is a Filzer PR-5 from MEC (Mountain Equipment Co-op), from about 10 years ago. It looks identical to this one being sold there now: https://www.mec.ca/en/product/6029-151/mec-rear-bike-rack

Design features

I've designed this to be small, with minimal openings on top where water can accumulate.

Required hardware

  • One M3x12 socket head bolts
  • One M3 DIN 562 square thin nut

Printing and assembly tips

  • Print the mount as oriented in the .stl files, using flex material. (It prints upside down.)
  • There is a small rectangular opening at the bottom, to accommodate the M3 DIN 562 square thin nut.
  • Slide the nut in gently. You can use the M3x12 bolt to push it in. If it's loose, you can add a drop of glue after it's inserted
  • Place the mount over the tubing on the bike rack and screw in the bolt until it's tight.
  • Insert the NU05v2 as you would with it's bike mount. It will “click” into place.

Notes

  • If your bike rack tubing is close but not a perfect match, let me know and I can probably adjust the model for you.

Tagi