NITECORE D4 EU Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resized model to make the EU version of the D4 fit.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 57
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I found @FluxLiquids wall mount for the Nitecore D4. But as written by someone in the comments there, the EU version of the D4 seems to be a bit beefier. I took the original model and just used the slicer to resize it. I also added a cutout on the right side to make the D4 go in more easily. However, it's still tight and requires some fumbling.
Kudos to @FluxLiquids for doing all the hard work of creating the original model.
I printed in QIDI ASA with 5 walls and 35% gyroid infill. The charger gets fairly warm and I also wanted a filament with good layer adhesion since you need to bend the holder to make the charger go in. I guess PETG and ABS will also work, PLA I would only try if nothing else is at hand.