Nitecore Cinewind Air blower french cleat hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hanger for a french cleat to store a Nitecore Cinewind air blower in the workshop
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A simple hanger for a french cleat to keep my Nitecore air blower within easy reach in the workshop.
The hanger locks onto the french cleat to stop it getting knocked off in use and can be adjusted to fit between a 66 and 78mm cleat.
Print settings and assembly:
Printed in PLA+, but pretty much any fillament will work.
Printed with 3 walls, 40% infill 0.2mm layer height
Supports used on the cleat to support the holes
4 M3 threaded inserts and cap head screws are used.
Print out 1 of each of the files, glue the left and right hooks to the back piece. Set in place 2 threaded inserts each into the cleat and clamp then screw the cleat and clamp to the back piece.