3030 CoreXY Motor Shims
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Depending on the motor mounts, the XY motors may be pulled out of alignment with the belts due to the torsional forces…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Depending on the motor mounts, the XY motors may be pulled out of alignment with the belts due to the torsional forces produced by belt tension. I had one motor that required a thin shim behind it to adjust the alignment. I decided to design this to make the motor mounting look better and add adjustment capability.
Be careful with adjusting, this shim could place excessive force against the motor and mount.
Needed:
- 1 M5 x 10 mm screw
- 1 M5 nut
- 2 M5 x 12 mm screws with hammer head nuts for mounting.
Print Settings
Printer:
Anycubic Kossel Delta Plus
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
50%
Filament:
3D Solutech PLA
Black
Notes:
I printed with supports to the build plate.
Category: 3D Printer Parts