Replacement impeller for Tetra Whisper Power Filter 40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original impeller plastic breaks down over time and becomes brittle. The fins on the impeller fall off and the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The original impeller plastic breaks down over time and becomes brittle. The fins on the impeller fall off and the pump stops working. This is a replacement part for the impeller.
Post-Printing
Assembly
The impeller assembly consists of a magnet, shaft and rubber end caps. The end caps fit in a notch at the end of the shaft. They can be pulled off. Remove one end cap from the shaft and pull the assembly apart. The impeller is fitted over a white drive pinion. Pry the impeller off the pinion and replace with the printed impeller. Reassemble the impeller with the shaft and end cap.
I can't guarantee that all Power Filter 40's are exactly the same, but this one fits the model I have installed on my tank.Category: Replacement Parts