Replacement impeller for Tetra Whisper Power Filter 40
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original impeller plastic breaks down over time and becomes brittle. The fins on the impeller fall off and the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 64
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The original impeller plastic breaks down over time and becomes brittle. The fins on the impeller fall off and the pump stops working. This is a replacement part for the impeller.
Post-Printing
Assembly
The impeller assembly consists of a magnet, shaft and rubber end caps. The end caps fit in a notch at the end of the shaft. They can be pulled off. Remove one end cap from the shaft and pull the assembly apart. The impeller is fitted over a white drive pinion. Pry the impeller off the pinion and replace with the printed impeller. Reassemble the impeller with the shaft and end cap.
I can't guarantee that all Power Filter 40's are exactly the same, but this one fits the model I have installed on my tank.Category: Replacement Parts