Seat belt guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to pass a seat belt through a side panel in VW campervans or similar.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have printed this, but not yet installed it so believe it will work fine but its not yet fitted to my van so I can't show it in use. Intended for fitting inertia reel belts through the rear panels in my VW T25 (T3 or Vanagon), generally when belts are added to these the belt exits behind the panel whilst this should help achieve a better installation similar to that provided by VW in their later model T25's.
3 files provided, 1 to use as a template to make the cut in the sidewall panel, 2nd part slots around the belt and is then inserted into the panel, the 3rd part clips into the 2nd part (from the top) on the reverse of the panel to secure it in position. Should be mounted at an angle so that the belt exits parallel to the slot and in this manner the belt will conceal the slit used for fitting the belt in the top of the 2nd part.