Harmonica arrowhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print allows you to mount a small keychain harmonica to an arrow, to be fired from a bow or crossbow,
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
harmonica in link below
https://www.amazon.com/dp/B07VG6HD98?psc=1&ref=ppx_yo2ov_dt_b_product_details
prints as one piece, use a brim, infill should be about 60-100 percent for strength. the overhang for the outlet holes may be too shallow but a little stringiness is okay, trim it off with an exacto knife, the harmonica rests inside and should be held in with glue, hot glue works best. the hole accepts a 9mm arrow shaft. This arrowhead is kind of heavy so be careful using high powered compound bows. i launch mine with a low powered re-curve crossbow. have fun and be safe!
video here- https://www.reddit.com/r/3Dprinting/comments/vzcv7u/harmonica_arrowhead/