Harmonica arrowhead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print allows you to mount a small keychain harmonica to an arrow, to be fired from a bow or crossbow,
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 36
- Makes
- 0
- Views
- 1,229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
harmonica in link below
https://www.amazon.com/dp/B07VG6HD98?psc=1&ref=ppx_yo2ov_dt_b_product_details
prints as one piece, use a brim, infill should be about 60-100 percent for strength. the overhang for the outlet holes may be too shallow but a little stringiness is okay, trim it off with an exacto knife, the harmonica rests inside and should be held in with glue, hot glue works best. the hole accepts a 9mm arrow shaft. This arrowhead is kind of heavy so be careful using high powered compound bows. i launch mine with a low powered re-curve crossbow. have fun and be safe!
video here- https://www.reddit.com/r/3Dprinting/comments/vzcv7u/harmonica_arrowhead/