DB9 Serial Port Dust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dust cover for the male (computer) side of a DB9 serial port.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 215
- Wydruki
- 1
- Wyświetlenia
- 730
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Apologies for poor image quality of attached photos.
Created a couple years ago after I noticed how much dust was accumulating in the seldom-used DB-9 serial ports of my desktop computer. These ports still have a niche use, especially with older hardware that simply existed before USB and specialized hardware that hasn't needed to be updated in some time and/or is too expensive to replace.
My best results have been with flexible filament, as that gives a lot of leeway for tolerances being off. That being said, I have printed it in standard PLA and it worked just fine.
This model's also decent to use as a quick test print because of the small size. It's fast and doesn't use much material, so you can do a few of them while fiddling with the Live Z Adjust or other parameters. Watch for stringing!