Accessories - Big Plans Printer System

These models are part of the Big Plans 3D Printer System: https://lilmikey.com/printersystem/Accessories.html

These models comprise accessories for tool and spool storage and organization.

• 2020 Spool Holder - mounts to your frame, holds a normal-sized filament spool.
• Cable Clamp - used to keep wires and cables close to your extrusions. Clips to 2020.
  Cable Clamp - Open - used to keep wires and cables close to your extrusions. Clips to 2020 and allows cable to be pushed in without removing the clamp.
• LED Strip Clip - Attaches to 2020 extrusion and holds (non waterproofed) strip lights in place.
• Modular Tool Mount - Attaches to 2020 extrusion and holds any of the modular tool holders.
• Modular Tool Mount - Double - Attaches to 2020 extrusion and is twice the height of the tool holders (good to two spatula mounts to keep to from vibrating against the frame).
• Modular Multi Tool Holder - Has five slots for pliers/drivers/tweezers/etc.
• Modular Spatula Holder - Slotted holder for part removal spatulas. Use two in a double holder to keep the spatula from vibrating against the frame.
• Modular Spatula Holder (w tools)- Holds a spatula with some slots for other small tools.
• Modular Debur Holder - Holds small deburring tool and blade packs.
• Modular Tray - small general purpose tray.
• Modular Tool Tube - Tube with a bottom for drivers, glue sticks, etc.
• Modular Pen Holder - Skinny tube for pens or hobby knives. Needs a lot of supports to print.
• Modular Ring - Big 'ole ring. Good for finger ratchet.
• Rod Holder - Tall/Short - attaches to top of 2020 and holds a 5/16 rod - either parallel or perpendicular.
• Rod Holder - XL - really tall 5/16 rod holder that mounts around 2020 extrusion. Only hold rod parallel to extrusion.
• Rod Cable Clip - clips to 5/16 rod to keep cable loom or boden tube in place.
• Rod Washer - insert a 5/16 lock nut and threads onto rod to keep things in place.
• Rod Spool Holder - sleeves around 5/16 rod in case you don't just want to put your spools directly on the rod.
• Tablet Double Mount - mounts to 2020 extrusion and holds one side of a tablet. Mirror for the other side.
• Tablet Top Support - If table mounts are used in 'lower' configuration this can be placed on top of the extrusion to support the upper part of tablet.