LayersFactory
Report model
1 / 4
Accessories - Big Plans Printer System — image 1
1 / 4

Accessories - Big Plans Printer System

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Other Printer Parts & Upgrades
License
Creative Commons — Attribution
DetailsMakes & commentsRemixesCollectionsRelated

These models are part of the Big Plans 3D Printer System: https://lilmikey.com/printersystem/Accessories.html

These models comprise accessories for tool and spool storage and organization.

  • 2020 Spool Holder - mounts to your frame, holds a normal-sized filament spool.
  • Cable Clamp - used to keep wires and cables close to your extrusions. Clips to 2020.
    Cable Clamp - Open - used to keep wires and cables close to your extrusions. Clips to 2020 and allows cable to be pushed in without removing the clamp.
  • LED Strip Clip - Attaches to 2020 extrusion and holds (non waterproofed) strip lights in place.
  • Modular Tool Mount - Attaches to 2020 extrusion and holds any of the modular tool holders.
  • Modular Tool Mount - Double - Attaches to 2020 extrusion and is twice the height of the tool holders (good to two spatula mounts to keep to from vibrating against the frame).
  • Modular Multi Tool Holder - Has five slots for pliers/drivers/tweezers/etc.
  • Modular Spatula Holder - Slotted holder for part removal spatulas. Use two in a double holder to keep the spatula from vibrating against the frame.
  • Modular Spatula Holder (w tools)- Holds a spatula with some slots for other small tools.
  • Modular Debur Holder - Holds small deburring tool and blade packs.
  • Modular Tray - small general purpose tray.
  • Modular Tool Tube - Tube with a bottom for drivers, glue sticks, etc.
  • Modular Pen Holder - Skinny tube for pens or hobby knives. Needs a lot of supports to print.
  • Modular Ring - Big 'ole ring. Good for finger ratchet.
  • Rod Holder - Tall/Short - attaches to top of 2020 and holds a 5/16 rod - either parallel or perpendicular.
  • Rod Holder - XL - really tall 5/16 rod holder that mounts around 2020 extrusion. Only hold rod parallel to extrusion.
  • Rod Cable Clip - clips to 5/16 rod to keep cable loom or boden tube in place.
  • Rod Washer - insert a 5/16 lock nut and threads onto rod to keep things in place.
  • Rod Spool Holder - sleeves around 5/16 rod in case you don't just want to put your spools directly on the rod.
  • Tablet Double Mount - mounts to 2020 extrusion and holds one side of a tablet. Mirror for the other side.
  • Tablet Top Support - If table mounts are used in 'lower' configuration this can be placed on top of the extrusion to support the upper part of tablet.