Doubled Improved MMU Filament Guide for LACK IKEA table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just AcE Krystal's design, cut and mirrorred for the widest size possible to print on MK3S+
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 766
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
When I was building my enclosure, i chose to use AcE Krystal's design for the fillament slot, with mind of having two spools at the ready everytime. But only as i had two sets already printed, i noticed that i would much more appreciated single long slot, rather than two separate ones.
I frankensteined my prints into one wide slot using a hacksaw and some superglue, and it works, but later i took time to re-model the files for printing for everyone to use.
This is the maximum size that should fit on the MK3S's bed, rotate 37°.