iPhone Holder with Wireless Charging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wireless iPhone charging for iPhone8. There are two STL files available.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Wireless iPhone charging for iPhone8. There are two STL files available. They both fit the Anker A2513 wireless charging puck. One is sized for the Otterbox Deffender case and the other is for the Otterbox Commuter (slightly smaller) case.
Both holders have wire management to guide the USB cable out the top, left, or right side. The mounting screw holes are 38mm on-center and are compatible with the AMPS mounting standard. I found that Panavise InDash mounting system has brackets for most makes and models of vehicles.
Print instructions
Category: Mobile Phone Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: Yes
Resolution: .2
Infill: 15%