Tronxy X5SA (PRO) Extruder/Stepper Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternate way of mounting the extruder to the stepper motor without using the stepper's screw holes.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 897
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My original extruder mounting system failed after a day and a half so I quickly threw this together. The screws TronXY used only went in about a third of the way and it caused the extruder lever to strip the threads on the stepper motor. It kept happening with different screws and rotating the motor to the point where I had stripped all four screw holes.
This adapter allows you to mount the stepper motor and extruder without using the stepper's screw holes. The extruder parts attach using 4 M3 nuts placed above where the stepper motor holes are and the original TronXY mounting hardware. The two halves attach using 4 m3 nuts and 16mm M3 Screws
Hardware required:
1x: Stock TronXY X5SA extruder parts and hardware.
8x: M3 Nuts
4x: M3x16 Screws