1 / 2
Alien Motion Tracker — zdjęcie 1
1 / 2

Alien Motion Tracker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Motion tracker from the game Alien Isolation

Ocena
5 / 5
Polubienia
21
Pobrania
219
Wydruki
1
Wyświetlenia
1955
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

# Raspberry Pi based motion tracker
# Runs on pygame and python3
# HC-SR04 Ultra Sonic sensors x 3 used
# Will run on any 40pin Raspberry Pi
#
# Prototype created by SHEDTECH on behalf of
# WEYLAND-YUTANI corp. - Building Better Worlds
#
# Author:        Billy O Sullivan
# Created date:       20 June 2022
# Edited:        06 July 2022
#
#
# Switch 1, SW1, controls the mode. At present there are 2 modes:
# mode 1 is a demo mode that simulates motion with pre programmed motion
# mode 2 takes motion from the sensors.
#
# Switch 2, SW2, controls the sound. The sound is generated by a 3 volt buzzer.
# by default the buzzer is on. push SW2 to turn it off.

Tagi