1 / 3
T-nut M3 drop-in rotating T-Slot 5mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M3 T-nut adapter for 20x20 or 20x40 T-Slot aluminum extrusion (5 mm gap). It should slide into profile groove not…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 283
- Wydruki
- 6
- Wyświetlenia
- 1063
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (0)Kolekcje (84)Powiązane
M3 T-nut adapter for 20x20 or 20x40T-Slot aluminum extrusion (5 mm gap).
It should slide into profile groove not straight but at angle and then rotate when inside.
Note: this design has not been tested. It may fit tightly in 5 mm profile groove.
Category: 3D Printer Parts