Tevo Tarantula semi open cable drag chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my design for cable drag chain for Tevo Tarantula based on my semi open drag chain:…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 670
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here's my design for cable drag chain for Tevo Tarantula based on my semi open drag chain: https://www.thingiverse.com/thing:2999958
It does not require disassembly / unscrewing of the cables.
It requires 15 links, which could be printed all-in-one or separately.
The end for bed connector allows unplugging.
The end for rail can be screwed from the top or side of the rail with spare T-nut and 10 mm hex screw.
Here's the chain in action: https://www.youtube.com/watch?v=HF8_3mJsSMU
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Print slow, 15-20 mm/s in PLA/ABS
Print lid/s flat (up side down)
Category: 3D Printer Parts