Tevo Tarantula semi open cable drag chain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's my design for cable drag chain for Tevo Tarantula based on my semi open drag chain:…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 133
- Makes
- 1
- Views
- 670
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Here's my design for cable drag chain for Tevo Tarantula based on my semi open drag chain: https://www.thingiverse.com/thing:2999958
It does not require disassembly / unscrewing of the cables.
It requires 15 links, which could be printed all-in-one or separately.
The end for bed connector allows unplugging.
The end for rail can be screwed from the top or side of the rail with spare T-nut and 10 mm hex screw.
Here's the chain in action: https://www.youtube.com/watch?v=HF8_3mJsSMU
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Print slow, 15-20 mm/s in PLA/ABS
Print lid/s flat (up side down)
Category: 3D Printer Parts