Fidget Tolerance Test Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looking for a super economic and fast printing version of tolerance test for your printer that not only will do its…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 276
- Wydruki
- 6
- Wyświetlenia
- 1149
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Looking for a super economic and fast printing version of tolerance test for your printer that not only will do its job but let you have some fun afterwards?
Here it is!
45 mm in diameter, 7 mm high, it requires only ~6 g of filament and prints in ~45 minutes (60 mm/s, 25%).
There are two versions:
Lo - 0.05..0.35 mm (less fun)
Hi - 0.20..0.50 mm (more fun)
Pick one of your choice, print, free as many spools as possible with a flat screw driver and play with fidget spinner!
Design inspired by tolerance test by Maker's Muse:https://www.youtube.com/watch?v=TYuLVN3YHw8
And tolerance test by zapta: https://www.thingiverse.com/thing:2318105
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Yes
Supports:
No
Resolution:
0.1 - 0.2
Infill:
25%
Notes:
Raft is recommended get most of the test due to risk of fused bottom layers when printing directly on bed - elephant foot.
Category: 3D Printing Tests